Single cable 3 prong copper clip-retrofit - 16″ Strap
ICE Shield Self-Regulating Heat Tape for Roofs & Gutters Description
Copper 16” long strap with six offset nail slots and three cable prongs to secure a de-icing cable. Designed to be used on slate roofs without nails, screws or adhesives.
Please note that this is a special order item and is therefore not eligible for returns. All sales of this item are final.
Specifications
Product Dimensions
| Clip Dimensions | 3 in x 2.5 in |
| Overall Length (Clip + Strap) | 19″ |
| Weight | 0.3 lbs |
Identifiers
| SKU | ET-CL-CU-SLS-16 |
| UPC (GTIN-12) | 881308060305 |
Frequently Asked Questions
Showing all 3 questions
WarmlyYours offers a conversion kit (SR-PLUG-KIT) to enable a plug-in requirement. This kit includes ground fault equipment protection (GFEP). The receptacle must be 120V, grounded, and approved for wet locations if located outside. The self regulating cable must not exceed 140‘ in length.
No. Aluminum 3-prong clips can cause rapid galvanic corrosion if they come in direct contact with copper. WarmlyYours recommends using our Self-Regulating roof & gutter cable fastened with 3-prong Copper clips (ET-CL-CU-P25) and double-sided adhesive pads (ET-VHB-PAD-P25) for this application.
