Plug-in Conversion Kit with GFCI for Self-Regulating Heating Cable (Includes End-Seal Kit)
- Plug-in conversion kit with GFCI protection for compatible 120 V ET-SR or PT-SR self-regulating heating cable.
- Includes an end-termination kit; one kit is required for each independent cable run.
- cULus Listed for the specified 120 V cable systems.
ICE Shield Self-Regulating Heat Tape for Roofs & Gutters Description
The SR-PLUG-KIT Plug-in Conversion Kit with Ground Fault Circuit Interrupter (GFCI) for Self-Regulating Heating Cable (part #JSR08) includes materials to facilitate plug-in installation for self-regulating (otherwise hardwired) roof & gutter deicing or pipe freeze protection systems. This kit provides ground-fault protection and is cULus Listed for 120V (only) ET-SR or PT-SR series cables. An end-termination kit is included. One required for each individual run of cable.
Specifications
Warranty / Certifications
| Approvals | cULus listed |
Product Dimensions
| Length | 9″ |
| Weight | 0.8 lbs |
| Width | 7″ |
Electrical
| Maximum Cable Length | 140′ |
| Maximum Load (Resistive Only) | 15 A |
| Voltage | 120 V |
Identifiers
| SKU | SR-PLUG-KIT |
| UPC (GTIN-12) | 881308056063 |
Documents
Frequently Asked Questions
Showing all 2 questions
WarmlyYours self-regulating roof and gutter de-icing cable can be used on rubber or EPDM (Ethylene Propylene Diene terpolyMer) roofs.
The primer that WarmlyYours sells is specifically for adhering clips to EPDM or rubber roofing.
No. Aluminum 3-prong clips can cause rapid galvanic corrosion if they come in direct contact with copper. WarmlyYours recommends using our Self-Regulating roof & gutter cable fastened with 3-prong Copper clips (ET-CL-CU-P25) and double-sided adhesive pads (ET-VHB-PAD-P25) for this application.