Ember Smart Mirror WiFi Infrared Heating Panel - 500W - 24″ x 35″ - Dual Connection
- Energy-efficient heating solution
- Reduces dust and allergens
- Sleek, modern design
- Consistent, even warmth
- Ideal for any room
Coming soon
This product is not available to order yet.
What Size Panel Do I Need?
An infrared heating panel is a great way to add supplemental heat to a room—not unlike a wall mounted space heater. The table below will help you identify the typical room size* that an infrared heating panel can help warm up, based on wattage/heat output.
| Infrared Heating Panel Wattage* | Warming Coverage |
|---|---|
| 300W Ember | 43 sq. ft. |
| 500W Ember | 71 sq. ft. |
| 600W Ember (Glass Only) | 86 sq. ft. |
| 700W Ember | 100 sq. ft. |
| 800W Ember (Glass Only) | 114 sq. ft. |
*This estimation is based on installing an infrared heating panel in a typical/average room. One factor that will impact the actual results is a room's degree of heat loss, which can be impacted by a number of factors including ceiling height, number of windows, and insulation level.
To get a free Heat Loss Calculation based on your room:
Ember Smart Mirror Infrared Heating Panels Description
Specifications
Performance
| Heating Coverage | 0 ft² |
Identifiers
| SKU | IP-XC500-WIM |
| UPC (GTIN-12) | 881308084868 |
Electrical
| Voltage | 120 V |
Frequently Asked Questions
Showing all 5 questions
Yes, if it’s mounted away from the tub and shower, where nobody in the bath or shower can touch it. Plug it into a GFCI-protected outlet, or have a licensed electrician hardwire it to local code. Hang towels on a towel bar, never on the panel.
No, infrared heating panel heaters are designed and rated to be installed outside of a shower or bath enclosure.
Panels are not designed for painting/drawing over, such use will void the warranty of the product.
Infrared heating panels are designed for supplemental heating, not as a primary heat source. They work best to boost warmth in specific rooms or offset cold spots, but most homes require a central heating system for whole-home comfort.Why panels are supplemental:
- Coverage area: Each panel heats 50–150 sq.ft. (one room or zone)
- Wattage limits: 300–800W per panel (not enough for whole-home heating)
- Installation: Requires multiple panels for multiple rooms (costly for whole-home coverage)
Best use cases for supplemental heating:
- Cold rooms: Basements, sunrooms, garages, workshops
- Spot heating: Home offices, bathrooms, bedrooms
- Zone heating: Heat only occupied rooms (save energy)
- Seasonal use: Three-season rooms, vacation homes
- Supplement existing heat: Boost warmth without cranking up thermostat
When panels CAN be primary heat:
- Tiny homes: 200–400 sq.ft. spaces (1–2 panels sufficient)
- Well-insulated spaces: Modern, energy-efficient construction
- Mild climates: Regions with minimal heating needs
- Single-room dwellings: Studio apartments, ADUs
Sizing guidance:
Use our Heat Loss Calculator to determine if infrared heating panels can meet your heating needs or if they’re best used as supplemental heat.
No — painting the face of a panel changes its surface emissivity and can reduce heat output, and it may void the warranty. Choose a factory finish instead: WarmlyYours infrared heating panels come in glass, mirror and white finishes (including a mirror option that doubles as a full-length mirror) designed to radiate heat efficiently while complementing your décor.