Remote Manual Override Device (RCO)
Description
WarmlyYours’ RCO Remote Control Override provides a convenient and economical means of monitoring and controlling snow melting or roof and gutter deicing systems from a remote, indoor location. The manual override allows for greater user control. Featuring a 2-conductor hook up, the Remote Control Override can be installed up to 500’ from the control panel. Affordable and easy to install, it can be either flush or surface mounted to accommodate the requirements of your indoor installation. For use with SCP-120 or SCA-DUAL controls.
Learn more about snow melting systems. Perfect for heated driveways, patios, walkways and paths, accessibility ramps, or even stairs.
Specifications
Product Dimensions
| Length | 5.25″ |
| Width | 7.25″ |
Electrical
| Maximum Distance from Controller | 500′ |
| Voltage | 24 V |
Logistics
| Package Contents | RCU-3 Remote Control Unit (Qty 1), Wallplate Screws (Qty 2), 25′ Unshielded 22 Gauge 2-wire Jacketed Cable, Installation Manual |
Identifiers
| SKU | RCO |
| UPC (GTIN-12) | 881308021122 |
Warranty / Certifications
| Warranty | 2 years |
Controls
A great control is the secret to any great heating system.
Documents & Manuals
Project Planners
Technical Information
Catalogs
Customer Questions & Answers
Remote Control Override has 7 Questions and Answers.
Is it okay to cut the snow melting cable if it is too long for the application for which it was designed?
Never cut the heating cable. A heating cable will not work if it has been cut. If the heating cable is too long, call WarmlyYours to consult with a technician who will guide you in utilizing the additional length of cable.
May I cross or overlap the WarmlyYours snow melt heating cable?
When installing outdoor WarmlyYours snow melting cables for your driveway, patio, walkway, terrace, stairs, ramp, etc. - NEVER cross, overlap, or allow the heating cables to touch each other. Doing so will quickly cause a circuit failure due to excessive heat build up. Always follow the installation instructions and/or design layout plan to ensure the cable is installed with the correct spacing required for proper operation.
Why a GFEP breaker and not a GFCI breaker for WarmlyYours outdoor deicing and snow melting systems?
This National Electric Code (NEC) required protection for fixed outdoor deicing and snow-melting equipment may be accomplished by using circuit breakers equipped with ground-fault equipment protection (GFEP) of 30 mA. It is important to understand that this required equipment protection is not the same as a 5 mA GFCI used for personal protection.
How much does a snow melting system cost?
The heating elements for a snow melting system typically will start at $9 ($11 CAD) per sq. ft. for Snow Melting Cables and $11 ($14 CAD) per sq. ft. for Snow Melting Mats. However, you'll also want to keep in mind the cost of a control, and if required, sensor/s for your snow melting system, which will add to the cost. Use our free Quote Builder to get an idea of how much a system would cost for your project.
What happens if the snow melt cable is damaged during the installation?
If a cable is damaged during installation, recheck the system for continuity and confirm the integrity of the insulation with a megohmmeter, or "megger" tester, referring to the installation and testing instructions. If the cable fails any of these tests, take the following actions: clear a 3 foot square working area around the damaged section of cable, and record the cable part number from the UL tag and the location where you purchased the product. Call WarmlyYours with the above information. WarmlyYours will provide further assistance and supply a splice kit suitable for repairing the particular cable.
View all 7 Questions and Answers
Customer Reviews
Remote Control Override achieved an average rating of 5.0 stars with 7 reviews by our customers.
Good choice
Mike M., Lakewood, CO on 12/11/2023
The WarmlyYours ice melt I recently installed is working great. They clearly have a 5 star product. I have only two slight complaints: none of the contractors referred by WY ever bothered to call back, so I had to find electrician and concrete guy myself. The plastic cover on the Snow Switch should be hinged instead of fastened with screws.
Outstanding customer service, Pedro and the rest of the team
Vito P., College Point, NY on 11/01/2023
Outstanding customer service, Pedro and the rest of the team is always willing to help with any questions you may have. The heating mats are top notch and easy to install.
Great experience
Bill, Hawthorne, NY on 10/30/2023
From customer service to product quality, it was nice to have a company in your corner to help tackle a project.
Wonderful as usually
Jasmine U., Oak Grove, MO on 06/04/2023
Pedro and the tech team were wonderful as usual
Great Customer Service for an Excellent Product
Richard K., Lakewood, NJ on 03/17/2023
Our experience with WarmlyYours was great from the beginning. They were easy to work with and provided a custom plan and all the necessary hardware to accomplish the job. We changed the design in the process and we were helped every step of the way. The system was on just this week and everything functioned accordingly.
Must have this if you live in a snowy region
Anonymous, Colorado Springs, CO on 01/03/2023
Works great! No more salt or shoveling!
Mary knows her stuff. If she doesn't know , she calls you bac
Ken S., Commerce Township, MI on 09/28/2022
Mary knows her stuff. If she doesn't know , she calls you back within minutes with an answer.