Remote Manual Override Device (RCO)
Description
WarmlyYours’ RCO Remote Control Override provides a convenient and economical means of monitoring and controlling snow melting or roof and gutter deicing systems from a remote, indoor location. The manual override allows for greater user control. Featuring a 2-conductor hook up, the Remote Control Override can be installed up to 500’ from the control panel. Affordable and easy to install, it can be either flush or surface mounted to accommodate the requirements of your indoor installation. For use with SCP-120 or SCA-DUAL controls.
Learn more about snow melting systems. Perfect for heated driveways, patios, walkways and paths, accessibility ramps, or even stairs.
Specifications
Product Dimensions
| Length | 5¼″ |
| Weight | 0.8 lbs |
| Width | 7¼″ |
Electrical
| Maximum Distance from Controller | 500′ |
| Voltage | 24 V |
Logistics
| Package Contents | RCU-3 Remote Control Unit (Qty 1), Wallplate Screws (Qty 2), 25′ Unshielded 22 Gauge 2-wire Jacketed Cable, Installation Manual |
Identifiers
| SKU | RCO |
| UPC (GTIN-12) | 881308021122 |
Warranty / Certifications
| Warranty | 2 years |
See This Product in Action
Documents
Project Planners
Technical Information
Catalogs
Frequently Asked Questions
Showing all 1 questions
In addition to showing the status of the snow/ice melting system and controlling the hold-on time, the RCO will turn on/off the heat for these controllers.
Note: When the Heater Cycle switch is momentarily depressed, it will start a manual Heater Cycle for the Cycle Time setting. Momentarily depressed while heaters are being operated by a Hold-On Timer or during manual Heater Cycle will end the Heater Cycle. Heater operation during snow conditions cannot be canceled in this manner.
