Pro WP Waterproofing Membrane - 323 Sq. Ft. Roll - 39.5″ x 98.5′

5.00
Based on 14 reviews
Need help? Call our experts at 800-875-5285
Support Page

Features

  • An easy-to-clean integrated hair trap in the drain
  • A stronger drain flange
  • A wider variety of high quality drain grate covers
  • A denser shower pan which allows for the installation of a greater range of tile types, including glass tile

Description

The Pro WP is a soft, polyethylene membrane that allows you to waterproof your walls or floor prior to tile installation. The Pro WP Waterproofing Membrane is pliable, watertight, and doesn’t rot. The fleece weave of the membrane ensures proper adhesion—for best results, make sure to use high quality, name-brand modified thinset. This membrane also provides crack isolation benefits of up to 1/8” movement, which can help protect your finished tile floor from cracks telegraphing upwards from the subfloor.

This roll of Pro WP Waterproofing Membrane is 39.5” by 98.5’ (323 sq. ft.).

Specifications

Performance

Membrane Permeability 0.07 perm

Identifiers

SKU SH-172094-323
UPC (GTIN-12) 857937008193

Product Dimensions

Weight 20 lbs

Frequently Asked Questions

Modified thinsets are stronger once cured. Most have additional anti-crack features, and better initial tack/grab (AKA less “slump”). They also are required for use with porcelain and glass tile.

6 people found this helpful.  Did you find this helpful? Yes No

Pre-formed pans are easily modifiable and easy to install on any substrate. They are great for DIY, as well as for a fast and clean installation by a professional. Drypack kits do not work well for tiles smaller than 2" x 2" without additional work.

5 people found this helpful.  Did you find this helpful? Yes No

The actual cost of operating your floor heating system will vary depending upon a number of factors including the cost of electricity in your area and the length of time you run your system. The WarmlyYours TempZone™ Shower Floor Heating Mat, for example, uses 15 watts per square foot. Based on a national average electricity rate of $.10/kW/hr, the approximate operating cost of an average bathroom using this system, measuring 4' x 4' would be as little as 4 cents a day. This cost is based on running your system a full 8 hours per day. Try our Operating Cost Calculator for a quick estimate.

4 people found this helpful.  Did you find this helpful? Yes No
  • Jigsaw (for subfloor drain hole) & drill (for pilot hole)
  • Premium modified (Latex/Polymer) thinset mortar (not premixed)
  • 5-gallon bucket
  • Mixer and caulking gun
  • 3/16"x 3/16" square notch trowel
  • Margin trowel
  • Utility knife
  • PVC or ABS cement, and section of coupler pipe for connection
  • Level
3 people found this helpful.  Did you find this helpful? Yes No

A complete kit will include the following: 

  • Shower pan
  • 108 sq. ft. of waterproofing membrane
  • 33 linear feet of waterproof joint band
  • 4 pre-shaped inside corners
  • 1 drain flange with ABS or PVC neck (check your local standards for using ABS or PVC)
  • Drain grate riser with construction plug and hair trap
  • Drain grate cover
  • Curb piece/s
  • 2 outside corners for the curb

Note: If you elect to include floor heating, a complete kit will also include a TempZone Shower Floor Heating Mat, an nSpire Touch programmable thermostat, and a Circuit Check. 

3 people found this helpful.  Did you find this helpful? Yes No

Customer Reviews