Pro WP Waterproofing Inside Corner
Description
When installing a shower waterproofing membrane, this preformed inside corner helps cut down on installation time because it eliminates the need to manufacture an equivalent piece at the jobsite. It’s made out of waterproofing membrane and is used with high quality modified thinset to seal joints between 2 or 3 sections of waterproofing membrane that meet at an inside (90°) corner.
Specifications
Performance
| Membrane Permeability | 0.07 perm |
Identifiers
| SKU | SH-172097 |
| UPC (GTIN-12) | 857937008124 |
Product Dimensions
| Weight | 0.01 lbs |
Customer Questions & Answers
Shower Kits has 14 Questions and Answers.
Why is modified thinset better for my installation?
Should I install a traditional mud kit (drypack mortar and PVC liner / mortar and membrane) or use a pre-formed foam pan?
Pre-formed pans are easily modifiable and easy to install on any substrate. They are great for DIY, as well as for a fast and clean installation by a professional. Drypack kits do not work well for tiles smaller than 2" x 2" without additional work.
5 people found this helpful. Did you find this helpful? Yes NoWhat is the typical operating cost of a TempZone Shower floor heating system?
The actual cost of operating your floor heating system will vary depending upon a number of factors including the cost of electricity in your area and the length of time you run your system. The WarmlyYours TempZone™ Shower Floor Heating Mat, for example, uses 15 watts per square foot. Based on a national average electricity rate of $.10/kW/hr, the approximate operating cost of an average bathroom using this system, measuring 4' x 4' would be as little as 4 cents a day. This cost is based on running your system a full 8 hours per day. Try our Operating Cost Calculator for a quick estimate.
4 people found this helpful. Did you find this helpful? Yes NoWhat additional tools and materials are needed to install a Pro GEN II shower waterproofing kit?
- Jigsaw (for subfloor drain hole) & drill (for pilot hole)
- Premium modified (Latex/Polymer) thinset mortar (not premixed)
- 5-gallon bucket
- Mixer and caulking gun
- 3/16"x 3/16" square notch trowel
- Margin trowel
- Utility knife
- PVC or ABS cement, and section of coupler pipe for connection
- Level
What is included in a complete Pro Gen II shower waterproofing kit?
A complete kit will include the following:
- Shower pan
- 108 sq. ft. of waterproofing membrane
- 33 linear feet of waterproof joint band
- 4 pre-shaped inside corners
- 1 drain flange with ABS or PVC neck (check your local standards for using ABS or PVC)
- Drain grate riser with construction plug and hair trap
- Drain grate cover
- Curb piece/s
- 2 outside corners for the curb
Note: If you elect to include floor heating, a complete kit will also include a TempZone Shower Floor Heating Mat, an nSpire Touch programmable thermostat, and a Circuit Check.
3 people found this helpful. Did you find this helpful? Yes NoView all 14 Questions and Answers
Customer Reviews
Shower Kits achieved an average rating of 5.0 stars with 8 reviews by our customers.
Shower kit
Collin F., Kootenai, ID on 01/10/2021
I liked the WarmlyYours shower kit it is straight forward and easy to use. Takes one day to get your shower prepped for tile.
Water Proof Pipe Seal
Johnny A., Rochester, MN on 04/17/2020
This seal works very, very well. It fits so tightly around the pipe that there isn't a possible chance that water can seep by it's seal.
Water Proof Seal
Johnny A., Rochester, MN on 04/17/2020
Haven't installed it yet, but it's the same as the first one and I expect it will perform flawlessly as well.