Pro GEN II Solid Polystyrene Shower Curb - 3′ Long


Pro GEN II Solid Polystyrene Shower Curb - 3′ Long

$36.00





Support Page

Shower Waterproofing System Accessory Description

This 3-foot section of dense polystyrene can serve as the structure for a tiled shower curb. This curb works with a variety of tile shower waterproofing systems and membranes. It is constructed of durable, lightweight material that can be easily cut down to a desired size. A v-groove runs the entire length of the bottom which will create a strong dovetail hold with the cured thinset that adheres the curb to the subfloor.

Specifications

Identifiers

SKU SH-191421
UPC (GTIN-12) 857937008230

Customer Questions & Answers

Shower Waterproofing System Accessory has 14 Questions and Answers.

Don't see the answer you're looking for? Post your question

Why is modified thinset better for my installation?

Modified thinsets are stronger once cured. Most have additional anti-crack features, and better initial tack/grab (AKA less “slump”). They also are required for use with porcelain and glass tile.

2 people found this helpful.  Did you find this helpful? Yes No

Should I install a traditional mud kit (drypack mortar and PVC liner / mortar and membrane) or use a pre-formed foam pan?

Pre-formed pans are easily modifiable and easy to install on any substrate. They are great for DIY, as well as for a fast and clean installation by a professional. Drypack kits do not work well for tiles smaller than 2" x 2" without additional work.

2 people found this helpful.  Did you find this helpful? Yes No

The mat I bought is too big or too small. Can I add wire or remove wire to make it fit?

No. Never cut the heating mat. The floor heating mat is designed with a very specific resistance in order to consistently maintain heating at the chosen wattage per square foot. Trimming the heating cable in the mat would lower the resistance of the cable causing the system to overheat. Adding heating cable to the system would raise the resistance and the system would not heat properly.

If you think you have the wrong heating element, contact our 24/7 Technical Support Team by calling 1-800-875-5285. 

1 person found this helpful.  Did you find this helpful? Yes No

What is included in a complete Pro Gen II shower waterproofing kit?

A complete kit will include the following: 

  • Shower pan
  • 108 sq. ft. of waterproofing membrane
  • 33 linear feet of waterproof joint band
  • 4 pre-shaped inside corners
  • 1 drain flange with ABS or PVC neck (check your local standards for using ABS or PVC)
  • Drain grate riser with construction plug and hair trap
  • Drain grate cover
  • Curb piece/s
  • 2 outside corners for the curb

Note: If you elect to include floor heating, a complete kit will also include a TempZone Shower Floor Heating Mat, an nSpire Touch programmable thermostat, and a Circuit Check. 

Did you find this helpful? Yes No

What additional tools and materials are needed to install a Pro GEN II shower waterproofing kit?

  • Jigsaw (for subfloor drain hole) & drill (for pilot hole)
  • Premium modified (Latex/Polymer) thinset mortar (not premixed)
  • 5-gallon bucket
  • Mixer and caulking gun
  • 3/16"x 3/16" square notch trowel
  • Margin trowel
  • Utility knife
  • PVC or ABS cement, and section of coupler pipe for connection
  • Level
Did you find this helpful? Yes No

View all 14 Questions and Answers

Customer Reviews

Shower Waterproofing System Accessory achieved an average rating of 5.0 stars with 1 reviews by our customers.

Have you used this product before? Leave a review

Shower kit

Collin F., Kootenai, ID on 01/10/2021

I liked the WarmlyYours shower kit it is straight forward and easy to use. Takes one day to get your shower prepped for tile.

View all customer reviews
* Example payment is based on the listed product price(s) assuming a 24 month term loan and a 9.99% APR. Subject to approval of credit application. Rates range from 0.00% to 29.99% APR. APRs will vary depending on credit qualifications, loan amount, and term. Bread® pay over time loans are made by Comenity Capital Bank.