Pro GEN II Grate Cover, Pro Series Brick Pattern, Copper Finish
Features
-
An easy-to-clean integrated hair trap in the drain
-
A stronger drain flange
-
A wider variety of high quality drain grate covers
-
A denser shower pan which allows for the installation of a greater range of tile types, including glass tile
Description
This 3.75” x 3.75” Pro Series drain grate cover comes with a copper finish and brick pattern design. It’s compatible with the Pro GEN II Drain Assembly and it will friction fit within the drain riser. This screw-less installation method and included puller key means that the Pro GEN II’s integrated hair trap can be easily accessed and cleaned.
Specifications
Construction
| Grate Cover Steel Type | Stainless Steel |
Product Dimensions
| Grate Size | 3.75” x 3.75” |
| Weight | 0.25 lbs |
Identifiers
| SKU | SH-271336 |
| UPC (GTIN-12) | 865705000263 |
Frequently Asked Questions
Showing all 5 questions
Pre-formed pans are easily modifiable and easy to install on any substrate. They are great for DIY, as well as for a fast and clean installation by a professional. Drypack kits do not work well for tiles smaller than 2" x 2" without additional work.
- Jigsaw (for subfloor drain hole) & drill (for pilot hole)
- Premium modified (Latex/Polymer) thinset mortar (not premixed)
- 5-gallon bucket
- Mixer and caulking gun
- 3/16"x 3/16" square notch trowel
- Margin trowel
- Utility knife
- PVC or ABS cement, and section of coupler pipe for connection
- Level
A complete kit will include the following:
- Shower pan
- 108 sq. ft. of waterproofing membrane
- 33 linear feet of waterproof joint band
- 4 pre-shaped inside corners
- 1 drain flange with ABS or PVC neck (check your local standards for using ABS or PVC)
- Drain grate riser with construction plug and hair trap
- Drain grate cover
- Curb piece/s
- 2 outside corners for the curb
Note: If you elect to include floor heating, a complete kit will also include a TempZone Shower Floor Heating Mat, an nSpire Touch programmable thermostat, and a Circuit Check.
For shower kits, most of the modified thinsets you are looking for are listed as compliant with ANSI 118.4 and ANSI 118.11. Unmodified thinsets will be listed as compliant with ANSI 118.1. Modified thinset is an industry term for any thinset mortar which has additives (usually latex or acrylic).