Snow Melt OmniMat 4" Spacing, 240V, 3′ x 10′, 30 sq. ft., 4.8A
Features
-
Efficient Heat Output: This embeddable electric heating mat provides up to 38.5 watts per sq. ft.
-
Even Heating: Snow melting mats come with the heating elements pre-attached to a mesh in a serpentine pattern with consistent 4” spacing which ensures even heating
-
Embeddable in Concrete, Asphalt, or in Mortar Under Pavers: When you install a mat-based snow melting system within a new driveway, walkway, or patio, you can make sure your outdoor surface will be free of ice and snow all year
-
Fast and Easy Installation: Snow melting mats are faster and easier to install than snow melting cables but a bit more expensive
-
Installation Support: WarmlyYours offers free SmartPlan™ installation plans, 24/7 phone support, and a 10-year limited warranty
Snow Melt OmniMat Description
WarmlyYours snows melting mats safely and efficiently melt snow and ice from walkways, patios, and driveways. These 3 x 10 ft. 240 V snow melting mats provide 30 ft² of coverage. They feature a durable heating element affixed in a serpentine pattern to a polypropylene mesh backing, allowing for easy installation and even distribution of heat in asphalt, concrete or (mortar underneath) paver surfaces.
This Snow Melting Mat has 4 inch spacing between runs of the heating cable for energy efficient and dependable snow melting performance. The corrosion-resistant, twin-conductor heating element generates up to 38.5 watts per square foot. A 20-foot (6m) cold lead is included.
WarmlyYours snow melting mats are CSA certified for outdoor use in Canada and the U.S.
Specifications
Electrical
| Amps | 4.79 A |
| Ohms | 50.09 Ω |
| Voltage | 240 V |
| Watts | 1150 W |
| Watts Per Sq. Ft. | 38.33 |
Warranty / Certifications
| Approvals | cCSAus Listed |
| Warranty | 10 years |
Performance
| BTU Per Hour | 3924 Btu |
| Heated Coverage | 32.5 ft² |
Product Dimensions
| Cold Lead Length | 20′ |
| Coverage | 30 ft² |
| Heating Element Spacing | 4″ |
| Heating Element Thickness | 5/16″ |
| Height | 0.3125″ |
| Length | 10′ |
| Size | 3′ x 10′ |
| Size and Power | 3x10 ft - 38 W/sq.ft. |
| Weight | 6.2 lbs |
| Width | 36″ |
Appearance
| Color | Green |
Identifiers
| Product Line Name | OmniMat |
| SKU | WHMA-240-0310-4 |
| UPC (GTIN-12) | 881308074326 |
Installation
| Surface Types | Asphalt, concrete or in mortar under pavers |
Logistics
| UNSPSC Code | 40101842 |
Installation Plans
This is a real example of an installation plan that uses this product. If you want to design your own room or have any questions, please contact us.
Concrete (new) Subfloor
N/A Voltage
240V Operating Cost
297 cents per hour
This Installation Plan Includes:
Documents
Installation
- Snow Melting Installation Manual (English)
- Manual de Instalación para Sistemas de Derretimiento de Nieve (Spanish)
- Snow Melting & Slab Heating Application Cross Sections (Spanish)
- Snow Melting & Slab Heating Application Cross Sections (English)
- Snow Melting & Slab Heating Application Cross Sections (French)
- Snow Melting Installation Manual (French)
Project Planners
Warranties
Sell Sheets
Catalogs
Frequently Asked Questions
Showing all 5 questions
GFEP is the National Electric Code (NEC) required protection for fixed outdoor deicing and snow-melting equipment, which may be accomplished by using circuit breakers equipped with ground-fault equipment protection (GFEP) of 30 mA. It is important to understand that this required equipment protection is NOT the same as a 5 mA GFCI used for personal protection.
To ensure optimal performance, snow melting heating elements should be installed so that they are consistently 2"-3" from the finished surface. For installations using pavers, the maximum thickness for pavers installed over heating elements is 2.5".