Contact Us Open

Loading contact options...

Sign In

Loading...

Snow Melt OmniMat 4″ Spacing, 240V, 3′ x 30′, 90 sq. ft., 14.4A

$920
Need help? Call our experts at (800) 875-5285
Get an Instant Quote
Support Page
Jump to

Features

  • Efficient Heat Output: This embeddable electric heating mat provides up to 38.5 watts per sq. ft.
  • Even Heating: Snow melting mats come with the heating elements pre-attached to a mesh in a serpentine pattern with consistent 4″ spacing which ensures even heating
  • Embeddable in Concrete, Asphalt, or in Mortar Under Pavers: When you install a mat-based snow melting system within a new driveway, walkway, or patio, you can make sure your outdoor surface will be free of ice and snow all year
  • Fast and Easy Installation: Snow melting mats are faster and easier to install than snow melting cables but a bit more expensive
  • Installation Support: WarmlyYours offers free SmartPlan™ installation plans, 24/7 phone support, and a 10-year limited warranty

Snow Melt OmniMat Description

Ideal for large outdoor areas, WarmlyYours 3 x 30 ft. 240 V snow melting mats provide 90 ft² of radiant heat to melt away snow and ice. Installation for either commercial or residential applications is easy with these cut-and-turn mats, which feature a durable heating element affixed in a serpentine pattern to a polypropylene mesh backing. 

This Snow Melting Mat has 4 inch spacing between runs of the heating cable for energy efficient and dependable snow melting performance. The corrosion-resistant, twin-conductor heating element generates up to 38.5 watts per square foot. A 20-foot (6m) cold lead is included.

WarmlyYours snow melting mats are CSA certified for outdoor use in Canada and the U.S.

Specifications

Electrical

Amps 14.35 A
Ohms 16.72 Ω
Voltage 240 V
Watts 3445 W
Watts Per Sq. Ft. 38.28

Warranty / Certifications

Approvals cCSAus Listed
Warranty 10 years

Performance

BTU Per Hour 11755 Btu
Heated Coverage 97.5 ft²

Product Dimensions

Cold Lead Length 20′
Coverage 90 ft²
Heating Element Spacing 4″
Heating Element Thickness 0.3125″
Height 5/16″
Length 30′
Size 3′ x 30′
Size and Power 3x30 ft - 38 W/sq.ft.
Weight 15.6 lbs
Width 3′

Appearance

Color Green

Identifiers

Product Line Name OmniMat
SKU WHMA-240-0330-4
UPC (GTIN-12) 881308074357

Installation

Surface Types Asphalt, concrete or in mortar under pavers

Logistics

UNSPSC Code 40101842

Installation Plans

This is a real example of an installation plan that uses this product. If you want to design your own room or have any questions, please contact us.

Installation Plan Image
Flooring
Concrete (new) Subfloor
N/A Voltage
240V Operating Cost
341 cents per hour
Design Your Own Project Get a Free Quote

This Installation Plan Includes:

2 x
Snow Melt PowerMat 240V, 2 x 50 ft., 100 sq.ft., 20.87A
1 x
Outdoor Snow Melting Junction Box - Small - In-Ground
1 x
Small Relay Panel, (2x) 2-Pole

Frequently Asked Questions

Showing all 5 questions

That depends on a number of variables (like the temperature outside) but generally speaking these snow melting systems are designed to melt 1" - 3" of snow per hour. Anything above 3" per hour is typically considered blizzard conditions. 

25 people found this helpful Was this helpful? Yes No

Never cut the heating cable. A heating cable will not work if it has been cut. If the heating cable is too long, call WarmlyYours to consult with a technician who will guide you in utilizing the additional length of cable.

18 people found this helpful Was this helpful? Yes No

The material costs are similar. However, electric systems are easier to install, with fewer components and significantly lower maintenance costs. Electric systems will run for a shorter period of time to give the same level of performance but with much higher energy efficiency (typically 95%-98% efficient). Controls and sensors required for the two types of systems are very similar. Electric systems do not usually require slab insulation and do not create the concerns typically associated with hydronic systems. These concerns include, but are not limited to, return temperatures, flue gas venting, waterway shrinkage and property damage caused by leaking pipes or tubes.

15 people found this helpful Was this helpful? Yes No

When installing outdoor WarmlyYours snow melting cables for your driveway, patio, walkway, terrace, stairs, ramp, etc. - NEVER cross, overlap, or allow the heating cables to touch each other. Doing so will quickly cause a circuit failure due to excessive heat build up. Always follow the installation instructions and/or design layout plan to ensure the cable is installed with the correct spacing required for proper operation.

14 people found this helpful Was this helpful? Yes No

Our systems can handle low temperatures, but many controls come equipped with a Low-Temperature Lockout Feature. This feature prevents the system from running in very low temperatures. At very low temperatures it can become difficult for the system to effectively melt the snow. It is however possible to turn off this feature should you need the system to keep running during such low temperatures.

14 people found this helpful Was this helpful? Yes No

Customer Reviews

View More Reviews