Cozy Bedroom Retreat: Radiant Floor Warming in Coquitlam, BC

A 65 sq. ft. Bedroom Upgrade with Environ™ In-Floor Heating for Laminate

COQUITLAM, BC
Bedroom with Heated laminate floors after shot
Size: 65 sq. ft. Voltage: 120V Wattage: 817 W Amps: 7 A Flooring: Laminate Wood (Click Together Floating) Cost/hr *: $0.09

This Coquitlam homeowner wanted to transform their bedroom into a cozy sanctuary, but their new laminate flooring felt cold and unwelcoming during British Columbia's chilly mornings. WarmlyYours provided the perfect solution with the Environ™ electric floor heating system, designed specifically for floating floors. Now, they enjoy luxurious, silent warmth from the ground up, adding significant comfort and value to their home for just pennies a day.


Project Details

  • Location: Coquitlam, British Columbia
  • Heated Space Type: Bedroom
  • Square Footage: 65 sq. ft.
  • System Output: 817 Watts, 120 Volts, 7.0 Amps
  • Operating Cost: ~$0.085 per hour (See cost breakdown below)
  • Products Used: Environ™ Flex Rolls, Environ™ Easy Mats, SmartStat™ Thermostat

A Warm Solution for Cold Laminate Floors

The challenge for this Coquitlam, BC, bedroom was a common one: the homeowner loved the modern look of laminate wood flooring but dreaded the cold shock of stepping onto it each morning. They were seeking an energy-efficient heating solution that would provide consistent, gentle warmth without the noise or dry air of forced-air systems. The primary goal was to add a layer of luxury and comfort to their private retreat.

Because the project involved a "Click Together Floating" laminate floor, the ideal solution was the WarmlyYours Environ™ system. This electric floor heating system is specifically engineered for use under floating laminate and engineered wood floors. The installation plan cleverly used a combination of Environ™ Flex Rolls and Easy Mats to provide 65 square feet of targeted warmth, perfectly covering the main walking areas and the space around the bed.

The result is a bedroom that's now a warm and inviting space, 24/7. The 817-watt system provides ample floor warming, easily controlled by a SmartStat™ programmable thermostat. This allows the homeowner to schedule heating for when they need it most—like waking up and getting ready for bed—enhancing comfort while managing energy use effectively. This radiant floor heating system silently transforms the room from a cold space into a cozy haven.


Featured Products

  • Environ™ Flex Rolls & Easy Mats This versatile system (combining rolls and mats) is the premier choice for in-floor heating under laminate, engineered wood, and other floating floors. Its ultra-thin profile and foil-wrapped wires ensure even heat distribution and a simple, mortar-free installation.
  • SmartStat™ Programmable Thermostat (TH115-AF-GA-08) This 7-day programmable thermostat includes a floor sensor to ensure precise temperature control. Homeowners can "set it and forget it," optimizing comfort and energy efficiency by matching their heating schedule to their lifestyle.

* Running this 65 sq. ft. bedroom floor warming system is incredibly affordable. Based on current BC Hydro residential rates (approx. $0.1045/kWh), it costs just $0.085 per hour to run. That’s only $0.68 for a full 8-hour heating cycle. That’s less than $21 per month to enjoy luxurious warmth all winter long!

Project Gallery

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Frequently Asked Questions


It's highly affordable. This specific 65 sq. ft. bedroom system costs about $0.085 (8.5 cents) per hour to operate. For a typical 8-hour heating cycle, that's under 70 cents per day, or about $21 per month, based on current Coquitlam, BC electricity rates.
Absolutely, but you must use a system specifically designed for it. The Environ™ system used in this project is perfect for floating floors like laminate and engineered wood, as it installs directly underneath without the need for mortar.
Yes. Radiant heat warms objects and people directly (not the air), making you feel warmer at a lower thermostat setting. When paired with a programmable thermostat, you only use energy precisely when and where you need it, reducing waste compared to central systems.
In many modern, well-insulated homes, a radiant system can be the primary heat source. However, in colder climates like British Columbia, it's most often used as a supplementary comfort system to eliminate cold floors and complement an existing heat source, providing luxurious warmth exactly where you want it.

Featured Resources

Featured Products

Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared