Verified specifications for the discontinued Studio TW-ST-06BS-PL and its mounting method.
The manufacturer’s support specifications for the discontinued Studio TW-ST-06BS-PL list a width of 21.25 inches, depth of 4.375 inches and a 5-foot power cord. Confirm the full model before using these dimensions.
For drilling, follow the Studio installation manual: assemble the mounting brackets onto the actual warmer, measure the four mounting-hole positions and their diagonals, and transfer those measurements to the wall. The manual suggests mounting at least 24 inches above the floor and locating the left rail over a stud where possible.
The product specification’s nominal mounting pattern is not a substitute for measuring the assembled unit. Use the supplied hardware and suitable support. Do not rely on the old article’s unverified anchor offsets or overall height to drill holes.
Sources: TW-ST-06BS-PL specifications and Studio installation manual (steps 1–7; manual identifies TW-ST-C06PS-PL).
