Pair an nJoy thermostat with an iPhone

Connect an iPhone to the nJoy UWG5-4999 thermostat using Bluetooth.

1. Turn on Bluetooth in the iPhone settings. If the thermostat is already listed under My Devices, select its information button and choose Forget This Device.
2. Turn on the thermostat and install the WarmlyYours nJoy app.
3. In the app, choose Get Connected, accept the agreements, then choose Add Thermostat.
4. Press the thermostat’s lower right-side button as needed, up to four times, until its Bluetooth icon blinks.
5. In the app, choose Next, then Pair when the thermostat is found.
6. Press the round confirmation icon on the thermostat. A check mark confirms pairing.
7. Choose Next in the app, name the thermostat, and choose Done.

For help, contact WarmlyYours Technical Support at (800) 875-5285.

Sources

• Manufacturer instructions (publication 13397), PDF p. 1.