Timer Prog for Towel Warmer (TW-TIMER)

A GFCI/GFEP (Ground Fault Circuit Interrupter / Ground Fault Equipment Protection) works differently than a circuit breaker by specifically detecting a small imbalance in electrical current between the hot and neutral wires, which indicates a potential ground fault (like a person touching a live wire), and instantly shutting off the power to prevent shock, while a circuit breaker only trips when there's a significant overload in current flow on the circuit, like a short circuit or too many appliances plugged in.

Visit the Towel Warmer Controls page and scroll down to the Documents & Articles section. Find the timer model that matches yours and open its product page to access the installation manual and programming guide.

The three current hardwired controls are:

• Hardwired 4-Setting Countdown Timer (GK16-30090-0006) — select one of four countdown durations; no programming required
• Hardwired Programmable Timer (GK16-30090-0002) — up to 50 on/off events per week with a 7-day schedule
• Hardwired WiFi Switch (GK16-30090-0003) — app-based scheduling via My Leviton (iOS/Android)

If you received an older PLS750C bundled timer with your towel warmer purchase, its manual is also available on that page under Documents & Articles.

Can't find what you need? Contact WarmlyYours technical support:

• Phone: 1-800-875-5285
• Available 24/7 for installation and programming support

GFCI can fail for various reasons, such as wear and tear, moisture, corrosion, power surges, faulty wiring, or improper installation. Some of these causes can be prevented by regular inspection and maintenance, while others may require professional assistance. It is important to note that GFCI devices (ex. thermostat, breakers, outlets) should be tested regularly as these do wear out over time.