Snow Melt OmniMat 4" Spacing, 240V, 3′ x 10′, 30 sq. ft., 4.8A

(6)
Need help? Call our experts at 800-875-5285
Support Page

Features

  • Efficient Heat Output: This embeddable electric heating mat provides up to 38.5 watts per sq. ft.
  • Even Heating: Snow melting mats come with the heating elements pre-attached to a mesh in a serpentine pattern with consistent 4” spacing which ensures even heating
  • Embeddable in Concrete, Asphalt, or in Mortar Under Pavers: When you install a mat-based snow melting system within a new driveway, walkway, or patio, you can make sure your outdoor surface will be free of ice and snow all year
  • Fast and Easy Installation: Snow melting mats are faster and easier to install than snow melting cables but a bit more expensive
  • Installation Support: WarmlyYours offers free SmartPlan™ installation plans, 24/7 phone support, and a 10-year limited warranty

Snow Melt OmniMat Description

WarmlyYours snows melting mats safely and efficiently melt snow and ice from walkways, patios, and driveways. These 3 x 10 ft. 240 V snow melting mats provide 30 ft² of coverage. They feature a durable heating element affixed in a serpentine pattern to a polypropylene mesh backing, allowing for easy installation and even distribution of heat in asphalt, concrete or (mortar underneath) paver surfaces. 

This Snow Melting Mat has 4 inch spacing between runs of the heating cable for energy efficient and dependable snow melting performance. The corrosion-resistant, twin-conductor heating element generates up to 38.5 watts per square foot. A 20-foot (6m) cold lead is included.

WarmlyYours snow melting mats are CSA certified for outdoor use in Canada and the U.S.

Specifications

Electrical

Amps 4.79 A
Ohms 50.09 Ω
Voltage 240 V
Watts 1150 W
Watts Per Sq. Ft. 38.33

Warranty / Certifications

Approvals cCSAus Listed
Warranty 10 years

Performance

BTU Per Hour 3924 Btu
Heated Coverage 30 ft²

Product Dimensions

Cold Lead Length 20′
Coverage 30 ft²
Heating Element Spacing 4″
Heating Element Thickness 5/16″
Height 0.3125″
Length 10′
Size 3′ x 10′
Size and Power 3x10 ft - 38 W/sq.ft.
Weight 6.2 lbs
Width 36″

Appearance

Color Green

Identifiers

Product Line Name OmniMat
SKU WHMA-240-0310-4
UPC (GTIN-12) 881308074326

Installation

Surface Types Asphalt, concrete or in mortar under pavers

Logistics

UNSPSC Code 40101842

Installation Plans

This is a real example of an installation plan that uses this product. If you want to design your own room or have any questions, please contact us.

Flooring
Concrete (new) Subfloor
N/A Voltage
240V Operating Cost
297 cents per hour
Design Your Own Project Get a Free Quote

This Installation Plan Includes:

2 x
Snow Melt PowerMat 240V, 2 x 50 ft., 100 sq.ft., 20.87A
1 x
Outdoor Snow Melting Junction Box - Small - In-Ground
1 x
Small Relay Panel, (2x) 2-Pole

Frequently Asked Questions

Electric-resistance heating cables and systems have no polarity. This includes all current WarmlyYours heating elements.

14 people found this helpful.  Did you find this helpful? Yes No

Yes. The manufacturer's splice that connects the heating element to the cold lead should be entirely embedded in a noncombustible material (like asphalt, concrete, or mortar) within the outdoor surface that is being heated. 

13 people found this helpful.  Did you find this helpful? Yes No

GFEP is the National Electric Code (NEC) required protection for fixed outdoor deicing and snow-melting equipment, which may be accomplished by using circuit breakers equipped with ground-fault equipment protection (GFEP) of 30 mA. It is important to understand that this required equipment protection is NOT the same as a 5 mA GFCI used for personal protection.

10 people found this helpful.  Did you find this helpful? Yes No

To ensure optimal performance, snow melting heating elements should be installed so that they are consistently 2"-3" from the finished surface. For installations using pavers, the maximum thickness for pavers installed over heating elements is 2.5". 

9 people found this helpful.  Did you find this helpful? Yes No

Power requirements are measured in Amps and based on three factors: the watts per sq. ft. of the snow melting cable or mat, the area powered and the voltage used for the application. Our product is rated at 50 watts per sq. ft., so that is a constant factor. Most snowmelt projects are powered with 240V AC – not all, but most. The one factor that is always variable is the area to be heated/powered. That is based on your project. For a point of reference, let’s use the example above of a 350 sq. ft. concrete patio.

The formula is (50 W/sq. ft. x area of 350 sq. ft.) / V (240V) = Amps, so 17,500 / 240V = 72.9 Amps

8 people found this helpful.  Did you find this helpful? Yes No

Customer Reviews

Snow Melt Mats achieved an average rating of 5.0 stars with 6 reviews by our customers.

Have you used this product before? Leave a review

Always a great product!

Grounded D., Fort Collins, CO on 04/25/2025

Always a great product!

Great Help on Another Project

Shawn H., Fort Collins, CO on 04/25/2025

Love this company, very easy to work with and very helpful. Thanks again guys for helping with yet another project!

Fantastic support

Buffalo E., Mountain View County, AB on 03/29/2025

After doing some research on installing floor heat under an overhead door in a commercial facility, we found out about WarmlyYours products. We were impressed with the initial support which made us decide to use their products. We received the heat matting a short time after ordering. The product looks incredible durable and we’ll definitely be using it in the future!

Excellent product

Kevin S., Mahwah, NJ on 01/17/2025

Fairly priced system, easy to install and setup. Staff is very friendly, knowledgeable and easy to get on the phone for questions about the system or pricing for another system. We will be working with WarmlyYours for all of our heated driveway and sidewalks projects from now on.

Great services

Frederic J., Gaspe, QC on 10/04/2024

Very Good Communication, Quick Delivery, Great Product, excellent communication.Will do business again.

Wonderful as usually

Jasmine U., Oak Grove, MO on 06/04/2023

Pedro and the tech team were wonderful as usual

View all customer reviews