Contact Us After Hours

Loading...

Loading contact options...

Sign In

Loading...

Loading...


The Shock of Icy Bathroom Tiles Ends Here

This luxury master bathroom in Washington, Michigan utilizes a WarmlyYours electric floor heating system under polished tile and stone to turn cold winter mornings into a spa-like sanctuary.

WASHINGTON, MI
The Shock of Icy Bathroom Tiles Ends Here
Size: 70 sq.ft. Voltage: 120V Wattage: 490 W Amps: 4 A Flooring: Tile, Marble or Stone Connection: Hardwired Surface: Polished Cost/hr *: $0.02

Stepping onto freezing tile floors can instantly ruin a relaxing morning routine, especially during unforgiving Michigan winters. To eliminate this daily discomfort, Borchert Building Company transformed a standard master bathroom into a high-performance retreat. By pairing targeted radiant floor warming with a premium towel warmer, this project delivers wrap-around thermal comfort and long-term home value without sacrificing energy efficiency.

Project Details

SpecificationDetail
LocationWashington, Michigan
Space TypeMaster Bathroom
Surface / FlooringTile, Marble, or Stone (Polished)
System TypeElectric Floor Heating & Towel Warmer
Total Square Footage (Heated)31.5 sq. ft.
Technical Specs120V / 490W / 4.0A
Wattage per Sq. Ft.15 W/sq. ft.
Cable Spacing3 inches On Center (OC)
Products UsedTempZone™ Flex Roll, nSpire Touch Thermostat, Sierra Towel Warmer
Professional InstallerBorchert Building Company

A Dual-Comfort Upgrade for a Master Retreat

The Problem

The primary design obstacle for this Washington, MI master bath renovation was mitigating the thermal mass of the new polished tile flooring. In northern climates, stone and tile act as heat sinks, drawing warmth away from bare feet and making the entire room feel drafty. The homeowners required a solution that provided rapid, uniform comfort without requiring extensive structural modifications or raising the floor transition heights.

The Solution

To address this, Borchert Building Company mapped out a 31.5-square-foot heated zone using the WarmlyYours TempZone™ Flex Roll system. The ultra-low-profile heating cable embedded cleanly within the thinset layer directly underneath the tile. This configuration ensures that radiant heat travels straight upward, warming the dense flooring material quickly and evenly.

The Outcome

The installation was completed with a hardwired Sierra Towel Warmer, giving the homeowners a fully integrated, dual-source heating experience. Instead of walking into a chilly room and reaching for a damp towel, the space now functions as a highly efficient, automated personal spa. The addition of smart controls ensures the system only draws power when the room is active, maximizing local comfort while keeping utility impacts negligible.

Featured Products

  • TempZone™ Flex Rolls: Selected for its premium heating cable pre-spaced on a fiberglass mesh backing, this system speeds up installation while guaranteeing zero cold spots under the polished tile.
  • Sierra Towel Warmer: This polished stainless steel, 8-bar architectural feature provides dual functionality—silently drying and warming towels while gently contributing ambient radiant heat to the room.
  • nSpire Touch Thermostat: Featuring a sleek touchscreen interface and a built-in floor sensor, this programmable control ensures the system operates strictly on the homeowner's schedule to prevent energy waste.

* This floor warming system operates at approximately $0.02 per hour. At roughly $4.80 per month (based on a standard 8-hour daily heating cycle), running this luxury system costs less than a single premium cup of coffee, proving that high-end master bath comfort does not require high-end utility bills.

Frequently Asked Questions

Showing all 4 questions

Answer: Operating this 31.5 sq. ft. system for 8 hours a day costs approximately $4.80 per month. Explain: Electric radiant systems are highly efficient because they convert 100% of the electrical energy into direct thermal comfort, eliminating the duct losses common in forced-air systems. Example: For this Washington, MI home, running the bathroom floor costs a mere $0.02 per hour.
Answer: Yes, it is fully compatible and designed for thinset installation under stone, marble, and ceramic tile. Explain: The heating elements are engineered to withstand the alkaline environment of cementitious tile mortars and distribute heat safely across high-density flooring materials. Example: Borchert Building Company embedded this system directly under the master bath's polished tile floor to ensure immediate heat transfer.
Answer: At 4.0 Amps total, this floor system can share a standard 15-amp circuit, though a dedicated line is often preferred for bathrooms. Explain: The National Electrical Code (NEC) guidelines require assessing total load calculations; because this system draws only 490 Watts, its electrical footprint is remarkably small. Example: The 120V system in this project pulls a modest 4.0A, leaving plenty of headroom for standard master bath electrical layouts.
Answer: Electric systems are ideal for remodels due to their ultra-thin profile and lower installation costs. Explain: Hydronic heating requires extensive floor leveling, manifold plumbing, and added structural height, whereas electric mesh rolls fit seamlessly inside the standard tile thinset layer. Example: This project achieved complete floor warming over 31.5 sq. ft. without raising the bathroom floor transition or altering adjacent room heights.

Project Quote

Products used in this project, ready to add to your cart.

Tell Us About Your Project

Our team of Radiant Experts is ready to help.

Typically respond within 1 business day

Disclaimer: Images reflect individual client installations; however, strict compliance with the NEC and specific manufacturer installation manuals is required for all systems. For specific guidance on your layout, please contact our engineering support team.