Say Goodbye to Shoveling: An Automated Heated Driveway in Wauconda, IL

A custom snow melting system provides safety and convenience for a new asphalt driveway.

WAUCONDA, IL
Kaplan Snow Melt for Driveway Installation final result WAUCONDA, IL
Size: 469 sq.ft. Voltage: 240V Wattage: 21250 W Amps: 89 A Flooring: Asphalt (new) Cost/hr *: $3.61

Facing the challenge of harsh Illinois winters, this Wauconda homeowner sought a modern solution to eliminate the demanding chore of shoveling snow and the danger of icy surfaces. WarmlyYours delivered with a powerful 469-square-foot electric snow melting system installed by Kaplan Pavement Services. This automated system provides unparalleled convenience and safety, ensuring the driveway remains clear and accessible all winter long.


Project Details

  • Location: Wauconda, IL
  • Heated Space Type: Driveway
  • Flooring: New Asphalt
  • Square Footage: 469 sq. ft.
  • Watts: 21250 W
  • Volts: 240V
  • Amps: 89 A
  • Operating Cost: $3.61 per hour
  • Products Used:
    • Snow Melt Mats
    • Snow and Ice Melting Control Premium (SCP-120)
    • Small Relay Panel (RLY-4PL)
    • Aerial-Mounted Snow Sensor (AIR-SS)

Effortless Snow Melting

For residents in Wauconda, Illinois, heavy snowfall and ice are a predictable part of winter. The constant need to shovel, plow, and apply corrosive salts can be exhausting and damaging to pavement surfaces. The owner of this home wanted a permanent, automated solution for their new asphalt driveway to ensure it was always safe and clear for vehicles and pedestrians without the back-breaking labor.

The project was expertly handled by Kaplan Pavement Services, who embedded the durable WarmlyYours Snow Melt Mats directly into the new asphalt surface. The system was designed to provide full coverage for the 469-square-foot space. The mats were strategically laid out to ensure even heat distribution, effectively melting snow and preventing ice accumulation across the entire driveway.

The outcome is a truly hands-off snow removal solution. The system is managed by an advanced Snow and Ice Melting Control Premium, which connects to an aerial-mounted sensor. This smart setup detects both cold temperatures and moisture, activating the system automatically only when it’s needed and shutting off when the job is done. The homeowner now enjoys the peace of mind that comes with a consistently clear and safe driveway, no matter what the weather brings.


Featured Products

  • Snow Melt Mats: These durable electric heating mats are designed to be embedded in asphalt, concrete, or under pavers. They provide 50 watts per square foot of heating power to efficiently melt snow and ice.
  • Snow and Ice Melting Control Premium (SCP-120): This advanced, automatic control is the brain of the system. It uses data from a sensor to activate the heating elements only when precipitation and low temperatures are detected, maximizing energy efficiency.
  • Aerial-Mounted Snow Sensor (AIR-SS): This high-tech sensor reliably detects moisture and temperature, triggering the control to turn the system on or off automatically. Its aerial mounting ensures it is clear of ground-level interference.

* This powerful 469 sq. ft. snow melting system costs just $3.61 per hour to operate based on current Illinois electricity rates. During a typical 6-hour snowstorm, the cost to keep the entire driveway clear is about $21.66—a small price to pay for automated safety and freedom from shoveling.

Project Gallery

Frequently Asked Questions


The operating cost for this 469 sq. ft. system in Wauconda is approximately $3.61 per hour. Costs vary based on system size and the duration of a snow event, but it's an affordable way to ensure safety and convenience compared to other snow removal methods.
Absolutely. As this project demonstrates, WarmlyYours Snow Melt Mats are specifically designed for installation in new asphalt or concrete pours. The mats are laid out before the top layer of asphalt is applied, protecting them while ensuring powerful and efficient performance.
The system uses a combination of a controller (like the SCP-120) and a sensor (like the AIR-SS). The sensor detects both freezing temperatures and the presence of moisture (snow or ice). When both conditions are met, it signals the control to activate the heating mats automatically.
Yes, it is highly efficient. Unlike systems that run constantly, a smart system like this one only operates when snow or ice is present, minimizing energy consumption. This targeted operation prevents wasteful energy use while keeping your driveway safe.

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Featured Resources

Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared