NobleSeal with EFH

Share:


A brief overview of how our Tempzone system would be installed with the NobleSeal system.

Noble Seal is a water proofing membrane used in wet locations such as showers and saunas. It is compatable with our tempzone system. The membrane is made of chlorinated polyeyhylene and measures in at .03" (1/32 ") thickness.

The Tempzone would be installed as usual on the subfloor, using a latex modified thin-set cement. The NobleSeal membrane would be adhered next using the same latex modified cement. Tile can then be set on the NobleSeal, again using the same latex modified thin-set. Please refer to NobleSeal's installation guide for specifics regarding installation.

Information available at the following link:

http://www.noblecompany.com/Portals/0/PRODUCT%20INFO/Installation%20Instructions/NobleSeal%20TS%20Installation%20Instructions%20-%20ENG%200812.pdf

 

Written by Christopher Sphar
Posted on

Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request