Thermostat SmartStat™ Ambient and Floor Sensor 120V Non GFCI


Part Number: TH115-AF-120S
This support page provides publications, manuals, specifications, videos, support articles, and common support questions


question-mark
Common Support Questions (20)

publication
Publications and Manuals (14)

specifications
Specifications (15)

Videos (7)

Articles (10)

Similar Items (3)

Create a new Support Request

Common Support Questions


The breaker and wire sizes are selected based on the total amperage of the WarmlyYours heating system connected to a single thermostat. This information is on the WarmlyYours heating system's installation plan, electrical plan, or UL label. Based on guidelines from the National Electrical Code: loads up to 16 Amps may utilize 12 gauge wire with a 20-Amp breaker, and loads up to 12 Amps - 14 gauge wire with a 15-Amp breaker. Local code and/or other factors may change these guidelines.

Need more help? View support options

When the ground fault protection mechanism trips, the TEST light is On (red). To reset the ground fault protection, switch the thermostat to Off and back to On. The TEST light will turn off.

Need more help? View support options

One thermostat can control multiple heating mats/cables as long as all the heating elements are using less than 15 amps:

TempZone™ will cover aprx. 120 sq. ft. for 120V systems and 240 sq. ft. for 240V systems on one thermostat.

Environ™ will cover aprx. 150 sq. ft. for 120V systems and 300 sq. ft. for 240V systems on one thermostat.

Slab Heat will cover aprx. 90 sq. ft. for 120V systems and 180 sq. ft. for 240V systems on one thermostat.

Need more help? View support options

Set the COMFORT temp of the final period of the day starting at the desired time with the corresponding ECONOMY temp ending at 12:00 pm. Then on the first period of the next day, set the COMFORT temp of the first period at 00:15 am with the corresponding ECONOMY temp ending at the desired time.

Need more help? View support options

Press the MOD/RET button. Manual is indicated with a hand icon, and Automatic is indicated with a clock icon.

Need more help? View support options

Warmly Yours recommends running the floor heating system in F (Floor) mode for most homes. This provides the most efficient operation of the floor heating system and the best protection for the floor covering material that has been installed.

Need more help? View support options

All thermostats are mandated at 42" height for handicap accessibility, most private residences are mounted at 52-60".

Please see this video on how to install a WarmlyYours nSpiration Series thermostat.

Need more help? View support options

No, the RC-40AMP is controlled by a line voltage (120V/240V) thermostat.

Need more help? View support options

Turn the power (circuit breaker typically) to the thermostat off for 5 minutes and then back on to reset the thermostat.

If there is power to the thermostat and it still doesn't appear to work, then the next step toward a solution is to take Ohm measurements of the floor heating system.

This is done with a digital multi-meter that can select a low 200 Ohm (Ω) scale. To conduct this test, turn off the circuit breaker. Remove the thermostat completely from the wall and disconnect the wires connected to the LOAD connections at the back of the thermostat. Disconnect the ground wires from the house ground, and do the test shown on the links below. If you are uncomfortable doing this test, contact a qualified electrician.

Please follow one of these guides based on the type of heating system installed:

TempZone Single Conductor

TempZone Twin Conductor

For a quick overview of the testing process:

Here is a video showing how the test is done

Here is a video showing how to locate and identify the floor heating wires

If the system still does not function, contact +1 (800) 875-5285 WarmlyYours Technical Support and provide the Ohm measurements for further assistance.

Need more help? View support options

Warmly Yours has developed this Quick Programming Guide to simplify operation. The full capabilities can be found in the Owner's Guide, or you can view this video for a great tutorial.

Need more help? View support options

Press and hold the DAY button for 3 seconds. All 7 days will then appear on the screen. Use the HOUR, MIN and PGM buttons to establish the desired schedule.

Need more help? View support options

These are set with the configuration (dip) switches on the back of the faceplate. See the TH115 Owner's Guide for details or this article for more information.

Need more help? View support options

The manufacturer reversed the wiring pattern between the LOAD side and the LINE side on newly minted controllers, verify that your wiring matches the new wiring schematic stamped on the backplate of the new controller.

Need more help? View support options

Class A for all new orders, Class B if replacing a Class B unit.

Need more help? View support options

That is the sound the thermostat makes when the relay is either opened or closed to turn on or off the power to the floor heating elements. See this article for further information.

Need more help? View support options

Warmly Yours controllers incorporate built-in Class A GFCI protection for all new floor heating systems.  Class A GFCI provides personnel protection and trips when ground fault current exceeds 5 mA (milliamps).  Class B GFCI protection is pretty much obsolete, but older systems may still require it.  Warmly Yours controllers with built-in Class B GFCI provide equipment and circuit protection and operates when a fault to ground exceeds 15 mA.

Need more help? View support options

There is no factory reset of the thermostat. To effect a system reset, power it off and then back on at the circuit breaker.

Need more help? View support options

The ground wire in the floor mat must be connected directly to the ground wire of the supply or to the house ground wire.

Need more help? View support options

The flashing digits indicate that the actual (measured) floor temperature exceeds the thermostat temperature limit.

The temperature limit is set for either tile (104°F/40°C) or laminate (82°F/28°C) when the thermostat is first set up or re-configured.

For example: When the floor type (protection) is set to laminate, the limit defaults to 82°F/28°C. If the floor temperature goes above this - whether due to radiant floor heating or external heating sources, then the digits will flash and the heating is switched off.

Turning the temperature up or down will not affect the flashing digits. And leaving the thermostat alone with flashing digits does not harm the system.

Tip: To turn off the heated floor (ex. for months when it is not needed), on the outer edge of the thermostat, depress the lower right side button for 3-5 seconds. This will also turn it back on.

Need more help? View support options

If your thermostat is blank, the first thing to do is to test to see if voltage is present at the rear of the thermostat. If no power is reaching the thermostat, please inspect the circuit breaker powering the thermostat in the breaker panel, and verify that the breaker is a non-GFCI type. If it is a GFCI breaker, replace it with a non-GFCI breaker. If there is power entering the thermostat and it is blank, it will need to be replaced.

Need more help? View support options


Publications and Manuals



Specifications


Electrical

Connection Single pole, hot & neutral
Connection Method Hardwired
Ground Fault Protection (GFCI) None
Maximum Current 16.7 A
Maximum Load (Resistive Only) 2000 W - 120 V, 16.7 A
Supply 120 VAC, 50/60Hz
Voltage 120 V

Logistics

Country of Origin (COO) China

Product Dimensions

Depth 2″
Installed Depth 0.75″
Length 4.875″
Width 2.75″

Thermostat

Has Floor Sensor y

Identifiers

SKU TH115-AF-120S

Warranty / Certifications

Warranty Limited 3-year warranty and lifetime technical support

Videos



Articles



Similar Items




Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request