WarmlyYours.com

Electrical Rough-In Kits

When you purchase a heated floor system from WarmlyYours, there are a few additional products that will help during your installation process. It’s best to be prepared for installing heated flooring, so you’ll want to consider having these helpful accessories on hand. When it comes to a hassle-free, smooth installation process, these accessories can ensure a headache-free install and even increase the life of your floor heating system.

Electrical Rough-In Kits

Whether you’re a homeowner or trade professional, it’s vital to have the right tools for your radiant heating project. To provide this peace of mind, WarmlyYours has developed our Electrical Rough-In Kits that cover any local electrical code. These kits include everything you need to safely and correctly install a thermostat.

Our kits are available with either single-gang or double-gang boxes.

Single-Gang Box Kits

Recommended for use with any WarmlyYours nSpiration Series control.

Electrical Rough-in Kit
with 2 Conduits
Electrical Rough-in Kit with 2 Conduits $49.99

This is a great option for areas where the local code requires a separate conduit for low-voltage wires. With everything an electrician will need to install and connect a thermostat in accordance with this type of electrical code, this kit has you covered.

  • 3” X 2” X 3 ½” Single-Gang Box
  • (25) 3/16" or 5mm low-volt staples
  • 5” Cable Protector
  • (2) ½” x 6’ Flexible Metal Conduit
  • (4) ½” Flexible Metal Conduit Anti-short Bushing
  • (2) ½” Set Screw Connector
  • (2) ½” EMT Drive Strap
  • 3/8” x 4” Black Flex Tube

Add to Cart

Electrical Rough-in Kit with Conduit
Electrical Rough-in Kit with Conduit $39.99

Getting the job done correctly has never been easier with this complete electrical kit. It contains everything an electrician needs to install and connect a thermostat with an electric radiant heating system in accordance with National Electric Code.

  • 3” X 2” X 3 ½” Single-Gang Box
  • (25) 3/16" or 5mm low-volt staples
  • 5” Cable Protector
  • ½” x 6’ Flexible Metal Conduit
  • (4) ½” Flexible Metal Conduit Anti-short Bushing
  • (2) ½” Set Screw Connector
  • (2) ½” EMT Drive Strap
  • 3/8” x 4” Black Flex Tube

Add to Cart

Electrical Rough-in Kit
with Conduit
Electrical Rough-in Kit without Conduit $24.99

This kit was developed for projects in which the local electrical code does not require conduit for the low-voltage sensor wire or the power leads. It includes everything an electrician will need for installing and connecting a thermostat.

  • 3” X 2” X 3 ½” Single-Gang Box
  • (25) 3/16" or 5mm low-volt staples
  • 5” Cable Protector
  • 3/8” x 4” Black Flex Tube

Add to Cart


Double-Gang Box Kits

The extra-space is useful for thermostats with wires already attached to the model.

Electrical Rough-in Kit
with 2 Conduits
Electrical Rough-in Kit with 2 Conduits $59.99

When working with local codes that require a separate conduit for low voltage wires, look no further. This kit contains everything an electrician needs to install and connect a thermostat in accordance with the specific electric code.

  • 4" x 4” Double-Gang Box
  • ½” Single-Gang Mud Ring
  • (25) 3/16" or 5mm low-volt staples
  • 5” Cable Protector
  • (2) ½” x 6’ Flexible Metal Conduit
  • (4) ½” Flexible Metal Conduit Anti-short Bushing
  • (2) ½” Set Screw Connector
  • (2) ½” EMT Drive Strap
  • 3/8” x 4” Black Flex Tube

Add to Cart

Electrical Rough-in Kit with Conduit
Electrical Rough-in Kit with Conduit $49.99

Get the job done right with this complete electrical kit. This 9-piece kit contains everything an electrician needs to flawlessly install and connect a thermostat with an electric radiant heating system in accordance with the National Electric Code.

  • 4" x 4” Double-Gang Box
  • ½” Single-Gang Mud Ring
  • (25) 3/16" or 5mm low-volt staples
  • 5” Cable Protector
  • ½” x 6’ Flexible Metal Conduit
  • ½” Flexible Metal Conduit Anti-short Bushing
  • ½” Set Screw Connector
  • ½” EMT Drive Strap
  • 3/8” x 4” Black Flex Tube

Add to Cart

Electrical Rough-in Kit
with Conduit
Electrical Rough-in Kit without Conduit $29.99

This 5-piece kit was developed for projects in which the local electrical code does not require conduit for the low-voltage sensor wire or the power leads. It includes everything that an electrician needs for a thermostat installation, without the conduit.

  • 4" x 4” Double-Gang Box
  • ½” Single-Gang Mud Ring
  • (25) 3/16" or 5mm low-volt staples
  • 5” Cable Protector
  • 3/8” x 4” Black Flex Tube

Add to Cart


Always verify local code requirements for suitability and compliance before installing any electrical system.