Snow and Ice Melting Timer Control
- Reliable manual control
- Timer adjustable up to 12 hours
- Useable with snow melting or roof and gutter deicing systems
- Extremely easy operation
- Terminal block for easy wiring
Timer Control Snow & Ice Melt Description
The WarmlyYours SCM-DUAL Snow and Ice Melting Timer Control is a simple, affordable option for snow melting, slab heating, and roof and gutter deicing systems. At 120V operational voltage, this unit features a 12-hour, adjustable timer and a NEMA 1 enclosure with hinged cover. The operation of this control couldn't be easier as the user can simply turn the timer to their desired heating duration. It includes a 2-pole relay and terminal block for easy wiring. For projects with a smaller amperage draw (20 Amps for 120V or 10 Amps for 240 - 277V), the SCM-DUAL can be used without a relay panel. However, for projects with larger amperage draws, the controller must be used with a compatible relay panel. Using a relay panel, sold separately, allows control of larger jobs and can help switch voltages ranging from 120V to 277V.
|Applicable Voltages||120 VAC, 240 VAC, 277 VAC|
|Maximum Current Description||20 Amp, 120 VAC, 50/60 Hz; 10 Amp, 240 VAC, 50/60 Hz; 10 Amp, 277 VAC, 50/60 Hz|
|Maximum Load (Resistive Only)||20 Amp, 120 VAC, 50/60 Hz; 10 Amp, 240 VAC, 50/60 Hz; 10 Amp, 277 VAC, 50/60 Hz|
Warranty / Certifications
Documents & Manuals
- SCM-DUAL Snow and Ice Melting Timer Control to Heating Element Wiring Diagram (English)
- SCM-DUAL Snow and Ice Melting Timer Control to Relay Panel Wiring Diagram (English)
- Snow Melt Controller Comparison Sheet USA (English)
- Snow and Ice Melting Timer Control Sell Sheet (English)
Customer Questions & Answers
Timer Control Snow & Ice Melt has 26 Questions and Answers.
Is it okay to cut the heating cable if it is too long for the application for which it was designed?
Never cut the heating cable. A heating cable will not work if it has been cut. If the heating cable is too long, call WarmlyYours to consult with a technician who will guide you in utilizing the additional length of cable.
The material costs are similar. However, electric systems are easier to install, with fewer components and significantly lower maintenance costs. Electric systems will run for a shorter period of time to give the same level of performance but with much higher energy efficiency (typically 95%-98% efficient). Controls and sensors required for the two types of systems are very similar. Electric systems do not usually require slab insulation and do not create the concerns typically associated with hydronic systems. These concerns include, but are not limited to, return temperatures, flue gas venting, waterway shrinkage and property damage caused by leaking pipes or tubes.
Yes. The manufacturer's splice that connects the heating element to the cold lead should be entirely embedded in a noncombustible material (like asphalt, concrete, or mortar) within the outdoor surface that is being heated.
Never cross, overlap, or allow the heating cables to touch each other. Doing so will quickly cause a circuit failure due to excessive heat build up. Always follow the product instructions and/or design layout plan to ensure the cable is installed with the correct spacing required for proper operation.
The electrician may shorten the cold lead wires during the installation. Any lead wire extensions/splices must be made in a junction box in accordance with the installation instructions, and must comply with all national and local electrical codes. Never cut the heating cable.
View all 26 Questions and Answers