TempZone Cable VHB Double-Sided Tape 3/4″ x 26′
- Double-sided VHB tape for adhering TempZone cable fixing strips to clean subfloor surfaces.
- Roll dimensions: ¾ inch × 26 feet.
- TC-STRIP-PL fixing strips are sold separately.
TempZone™ 3-Watt Floor Heating Cable with Strips Description
TempZone™ Cable VHB Double-Sided Tape is used to adhere cablefixing strips to most clean subfloor surfaces. This double-sided tape isavailable in ¾” X 26’ rolls. The TC-STRIP-PLTempZone™ Cable Fixing Plastic Strips are sold separately.
Specifications
Product Dimensions
| Coverage | 22.5 ft² |
| Length | 26′ |
| Weight | 0.5 lbs |
| Width | 2½″ |
Cabling Specs
| Ideal Cable Spacing | 3″ |
Identifiers
| SKU | TC-TAPE-DS-026 |
| UPC (GTIN-12) | 881308047870 |
Documents
Project Planners
- Floor Heating Request for Quotation Form (English)
- Heated Tile Substrate Compatibility & Risk Map (English)
Technical Information
Wiring Diagrams
Frequently Asked Questions
Showing all 1 questions
Please keep in mind that you must check your electric floor heating system with a digital ohmmeter in conjunction with a Circuit Check™. Take an initial reading as soon as you take the product out of the box to verify that it is within -5% / +10% of the values stated on the product’s label. This will give you a basis of comparison for future readings. Take a second reading once you have positioned the system to match your custom installation plan. It is also advisable to take an additional reading in the middle of the tile installation, just to make sure that the Circuit Check™ is doing its job. Then, take a final reading when you are finished with the floor installation and are ready to hook up the thermostat.
The Circuit Check™ is a tool developed by WarmlyYours to give you peace of mind and ensure trouble-free installations. Simply hook up the cold leads to the tool while you position the system to match your custom installation plan.
The Circuit Check™ will continuously monitor the continuity of the circuit during the installation of your system and during the installation of your flooring. The Circuit Check™ beeps immediately when a short in the system is detected, alerting you to a potentially damaged cable in the area you are working, before you lay the tile over the electric floor heating system. The WarmlyYours technical support team is available 24/7 to provide assistance if the alarm sounds, or if you would have any questions during your installation.