Luxury Warmth for a Her Bathroom in Sykesville, MD

This project involved installing a premium electric radiant floor heating system in the "Her" side of a master bathroom in Sykesville, Maryland. The homeowners, working with Owings Home Services, LLC, wanted to eliminate the cold surface of their elegant tile, marble, or stone flooring. WarmlyYours delivered a customized, energy-efficient solution using the TempZone™ Flex Roll system and the advanced nSpire Touch Thermostat, providing targeted floor warming that instantly elevates the comfort and value of this high-end space.

Project Details

Location: Sykesville, MD
Heated Space Type: Bathroom (Her Master Bath)
Flooring: Tile, Marble, or Stone
Sub-Floor/Surface Type: Wood
Heated Square Footage: 36 sq. ft. (Full Coverage)
Electrical Specs: $120V, 540W, 4A
Operating Cost Per Hour: $0.03
- Per Day (8 hours of use): $0.24
- Per Month (30 days): $7.20

Warmth Underfoot in a Sykesville Master Bath

The renovation of this Sykesville, MD, master bathroom aimed for ultimate luxury, but the homeowners, advised by Owings Home Services, LLC, knew that cold tile, marble, or stone floors would detract from the high-end design. The "Her" section, in particular, demanded a constant level of comfort. They sought an in-floor heating system that was both high-performance and discreet.

WarmlyYours engineered a custom TempZone™ Flex Roll solution to perfectly fit the 36 sq. ft. heated area. The Flex Rolls, with their 15 W/sq. ft. output, were specifically chosen for their efficient heat delivery under hard, thermally conductive surfaces like the chosen flooring. The contractor found the "cut-and-turn" nature of the mats easy to install, ensuring uniform radiant floor heating throughout the space. By using the required Circuit Check tool during installation, they ensured the heating element remained undamaged. The system is controlled by the modern nSpire Touch Thermostat, which allows the homeowner to program precise temperature settings, guaranteeing that the floor is warm before she ever steps out of the shower.¹ The outcome is a truly luxurious master bath where every step is a pleasure, demonstrating the effectiveness of electric floor heating as a comfort upgrade

Featured Products

TempZone™ Flex Roll : High-performance $15W/sqft. electric radiant floor heating mat with a low-profile 1/8'' cable, ideal for installation under tile, marble, or stone. Comes pre-sized for quick installation.

nSpire Touch Thermostat : Programmable, dual-voltage (120V/240V) touchscreen thermostat with an integrated GFCI. Allows up to 6 temperature settings per day to maximize energy savings and comfort.

Circuit Check : A required tool used during installation to continuously monitor the heating element for damage, ensuring a successful and warranted installation.

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Frequently Asked Questions

1. How much does it cost to run heated floors in a Sykesville master bathroom?

Running this 36 sq. ft. electric floor heating system in Sykesville, MD, costs only about $0.03 per hour. This translates to a very low monthly operating cost (less than $8.00) because the system uses an efficient programmable thermostat to deliver heat only when needed.

2. Is electric radiant floor heating energy efficient for a small bathroom?

Yes, electric radiant floor heating is very energy efficient, especially in a small space like a master bathroom. It uses targeted, gentle infrared heat to warm the floor surface and objects, unlike forced-air systems. This makes it a highly energy efficient heating method for supplemental or primary warmth.

3. What flooring type works best with TempZone™ in-floor heating?

The TempZone™ Flex Roll system is perfect for use under materials that conduct heat well, such as tile, marble, or stone, which were used in this Sykesville project. These hard surfaces absorb and radiate the heat from the radiant floor heating cable quickly and effectively, ensuring optimal comfort.

4. What is the benefit of using the Circuit Check tool during installation?

The Circuit Check is essential for a successful floor warming installation. It continuously monitors the heating cable for potential damage (nicks, cuts) that could occur during the tiling process. By ensuring the cable is intact before the final flooring is laid, it saves the installer time and protects the homeowner's warranty.