Contact Us Open

Loading...

Loading contact options...

Sign In

Loading...

Loading...


Warm Stone Underfoot: A Dayton, OH Master Bath Remodel

Remodeling Designs installed a 120V TempZone Flex Roll under 84 sq. ft. of stone flooring in a 121 sq. ft. Dayton, OH master bathroom.

Dayton, OH
Heated stone floor in master bath with glass shower and vanity
Size: 121 sq. ft. Voltage: 120V Wattage: 1,625 W Amps: 13 A Flooring: Tile, Marble or Stone Surface: Pebble-Stone Tile Breaker: 20 Amp Cost/hr *: $0.09

Radiant heat under stone flooring on a wood subfloor turns a 121 sq. ft. Dayton master bathroom into a warm, everyday retreat

This Dayton, Ohio master bathroom was finished in stone, a surface that doesn't hold warmth on its own. Remodeling Designs laid a WarmlyYours TempZone Flex Roll beneath 84 sq. ft. of that stone over a wood subfloor, so the floor is warm every time someone walks in. It runs on a 120V circuit and costs about $0.09 an hour to operate.

Project Details

SpecificationDetail
LocationDayton, OH
Space TypeMaster Bathroom
Flooring / Surface TypeStone over a wood subfloor
System TypeRadiant Floor Heating
Total Square Footage121 sq. ft. room / 84 sq. ft. heated
Technical Specs120V / 1,625W / 13A
Products UsedTempZone Flex Roll, nSpire Touch thermostat, Circuit Check
Operating Cost~$0.09 / hour (at $0.1124/kWh)
Installer / ContractorRemodeling Designs

The Problem: A Stone Floor With No Warmth of Its Own

Stone gives a master bath a high-end look, but without a heat source beneath it, it stays at room temperature. For a bathroom used first thing in the morning and last thing at night, the homeowners wanted the floor itself to be warm, and the system had to work over a wood subfloor on a standard 120V circuit.

The Solution: TempZone Flex Roll Under 84 Sq. Ft. of Stone

Remodeling Designs specified a TempZone Flex Roll to cover 84 sq. ft. of the 121 sq. ft. room, installed over the wood subfloor and beneath the stone. The 1,625W system draws 13A at 120V. A Circuit Check was used during installation, and the floor is controlled by an nSpire Touch programmable thermostat with a 3.5-inch touchscreen.

The Outcome: A Master Bath Built for Bare Feet

The stone floor now delivers radiant warmth across the heated area, turning daily routines into a comfortable experience in every season. The homeowners manage comfort from the nSpire Touch thermostat and keep the look of natural stone.

Comparative Cost Highlight

Operating at approximately $0.09/hour, this system costs roughly $21.60/month at 8 hours a day—less than a daily cup of coffee—while providing unmatched barefoot comfort.

Featured Products

* Based on the Dayton, OH average electricity rate of $0.1124/kWh; about $0.72 per day at 8 hours of use.

Frequently Asked Questions

Showing all 4 questions

Answer: This system costs about $0.09 per hour to run.

Explain: The 1,625W system at Dayton's average rate of $0.1124/kWh works out to roughly $0.09 per hour of operation.

Example: Running 8 hours a day, this 84 sq. ft. heated stone floor costs about $0.72 per day.

Answer: Yes. This project heats stone flooring laid over a wood subfloor.

Explain: The TempZone Flex Roll was installed over the wood subfloor and beneath the stone finish.

Example: Remodeling Designs installed it under 84 sq. ft. of stone in this 121 sq. ft. Dayton master bathroom.

Answer: It runs on 120V and draws 13A.

Explain: Current is wattage divided by voltage, so the 1,625W system draws about 13A at 120V.

Example: That load covers the full 84 sq. ft. heated area in this Dayton master bath.

Answer: By an nSpire Touch programmable thermostat.

Explain: The nSpire Touch has a 3.5-inch touchscreen for setting and programming the floor heating.

Example: In this project it controls the TempZone Flex Roll under the stone floor, which was checked with a Circuit Check during installation.

Project Pro

Remodeling Designs

This project was installed by one of our trusted pros — see their profile and more of their work.

View Pro Profile

Featured Resources

Tell Us About Your Project

Our team of Radiant Experts is ready to help.

Typically respond within 1 business day

Disclaimer: Images reflect individual client installations; however, strict compliance with the NEC and specific manufacturer installation manuals is required for all systems. For specific guidance on your layout, please contact our engineering support team.