No more bracing for the shock of a freezing tile floor during a Pennsylvania winter. This project in Cresco aimed to transform the bathroom into a true sanctuary by addressing the long-standing issue of cold stone surfaces. By installing the TempZone™ Flex Roll system, WarmlyYours provided a seamless, energy-efficient solution that delivers consistent, envelope-like warmth, significantly increasing both the daily comfort and the long-term resale value of the home.
Project Details
- Location: Cresco, PA
- Heated Space Type: Bathroom
- Square Footage: 45 sq. ft. of coverage
- Voltage: 120V
- Total Wattage: 675 Watts
- Amperage: 5.7 Amps
- Operating Cost Per Hour: $0.11 (Based on PA average of $0.17/kWh)
- Daily Operating Cost: $0.88 (Based on 8 hours of use)
- Monthly Operating Cost: ~$26.40
- Products Used: TempZone™ Flex Roll, nSpire Touch Thermostat
The Story: Defeating the "Cold Tile Shock" in the Poconos
Living in the Poconos means dealing with crisp air and long winters, which can make a bathroom’s tile, marble, or stone flooring feel like a block of ice. The homeowner’s primary challenge was the "shock factor" of stepping onto a cold floor first thing in the morning. They needed a heating solution that was powerful enough to penetrate stone but thin enough not to raise the floor height significantly during the renovation.
The TempZone™ Flex Roll was the perfect fit. Because the mesh can be cut and turned, the installer was able to navigate around bathroom fixtures easily, ensuring 45 square feet of perfectly distributed heat. Paired with the nSpire Touch programmable thermostat, the system is now set to warm up just before the alarm goes off, ensuring the floor is toasty the moment a foot hits the ground.
Featured Products
- TempZone™ Flex Roll (120V): A low-profile, green mesh system that allows for easy "cut-and-turn" installation. It provides 15 watts per square foot, making it the industry gold standard for heating tile, stone, and marble.
- nSpire Touch Thermostat: A sleek, white programmable controller featuring a 3.5” color touchscreen and a built-in Class A GFCI for safety. It includes a floor sensor to maintain the exact temperature you desire.
