Luxury Warmth for a Master Bathroom in Gilberts, IL

Heated Floors for Ultimate Comfort: Installing a TempZone Flex Roll System

Gilberts, IL
Pouring self leveling cement over Floor Heating Mat Installation
Size: 65 sq. ft. Voltage: 120V Wattage: 967 W Amps: 8 A Flooring: Tile, Marble or Stone Cost/hr *: $0.05

This project showcases a complete comfort upgrade for a master bathroom in Gilberts, Illinois. Tired of stepping onto cold tile, the homeowner sought an efficient, luxurious solution. WarmlyYours delivered a custom-sized TempZone Flex Roll system installed with self-leveling compound, providing silent, energy-efficient electric floor heating that transforms the room into a spa-like retreat, significantly enhancing the home's daily comfort and long-term value.


Project Details

  • Location: Gilberts, IL
  • Heated Space Type: Master Bathroom
  • Square Footage: 65 sq. ft.
  • Power: 967 Watts, 120 Volts, 8 Amps
  • Flooring: Tile, Marble or Stone
  • Operating Cost Per Hour: $0.05
    • Approx. Daily Operating Cost (8 hours): $\approx \$0.40$
    • Approx. Monthly Operating Cost (30 days): $\approx \$12.00$
  • Primary System: TempZone™ Flex Roll

The Comfort Upgrade for Cold Tile

The challenge in this Gilberts, IL master bathroom was the common problem of cold ceramic or porcelain tile, which can make the room feel unwelcoming, especially during the long Midwestern winters. The homeowner wanted a discreet, reliable radiant floor heating system that would effectively heat the floor surface and provide supplemental warmth to the entire room.

The solution was the WarmlyYours TempZone Flex Roll, a highly versatile and easy-to-install product. The 65 sq. ft. area was perfectly covered by a 1.5' x 43' roll. The installation utilized a self-leveling compound (SLC) over the substrate to embed the heating element. Using SLC is an excellent method for ensuring the entire heating cable is encased, which maximizes heat transfer efficiency and protects the system beneath the new floor.1

By installing the in-floor heating system, the homeowner achieved continuous, silent floor warming right where they need it most—underfoot. Paired with a SmartStat Programmable Thermostat, the system can be scheduled to run only when the bathroom is in use, making this a highly energy efficient heating solution that provides unparalleled daily luxury.


Featured Products

WarmlyYours Snow Melting Systems are the perfect radiant heating solution for outdoor concrete, asphalt, or paver surfaces, eliminating the need for shoveling and salt.

  • SmartStat Programmable Thermostat w/Floor Sensor (TH115-AF-GA-08): This state-of-the-art thermostat features a floor sensor to precisely maintain the desired floor temperature. It is fully programmable, offering scheduling features to maximize energy efficiency and comfort.
  • TempZone™ Flex Roll 120V (TRT120-1.5x43): The core of the system. This TempZone Flex Roll features a thin heating cable factory-attached to a rollable mesh, simplifying the installation process. Perfect for large, regularly shaped areas like this master bathroom, it provides uniform radiant floor heating coverage.

* Based on an estimated average residential electricity rate, this 65 sq. ft. electric floor heating system in Gilberts, IL costs just about $0.05 per hour to run. This translates to an approximate operational cost of $0.40 per day (assuming 8 hours of use) or less than $12 per month.

Project Gallery

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Frequently Asked Questions


The cost is quite low due to the system's efficiency and targeted use. For this 65 sq. ft. master bathroom in Gilberts, IL, the operating cost is approximately $0.05 per hour, which typically amounts to less than $12 per month, making it a very affordable luxury.
In a well-insulated room like a master bathroom, a properly sized electric floor heating system can often serve as the primary heat source. However, it is primarily designed for floor warming and supplementary heat. A heat loss calculation is always recommended to confirm if the system can meet 100% of the room's heating requirements.
The TempZone Flex Roll is ideal for installations under materials like ceramic tile, porcelain tile, natural stone, and marble, as these materials are excellent conductors of heat. The use of a self-leveling compound in this project further ensures optimal thermal transfer and performance of the radiant floor heating system.
Yes, electric floor heating is highly energy efficient heating. It warms objects and people directly rather than the air, and because the thermostat keeps the heat focused exactly where and when it's needed (under the floor), minimal energy is wasted. This precision makes it a superior option for maximizing comfort while minimizing operating costs.

Featured Products

Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared