P: +1 (800) 875-5285
Mon-Fri, 7:30am-5:30pm CST
F: +1 (800) 408-1100

Lava is Buzzing When "ON"


Lava is "buzzing" or making some other sound when powered "ON".


Verify that the mounting bolts are fully tightened on the rail.

If not:  Tighten them until snug.

If bolts are tight:  Look behind the LAVA and check to see if the rail is touching the rear of the enclosure.  If it is, that is the cause of the sound.

Solution: Take some felt, and attach it in between the rail and enclosure.   Units received from Etherma during 2013 will be shipped with felt on the mounting rails.

Written by Scott Rosenbaum
Posted on
Subscribe for Updates