Pro GEN II Shower Drain Assembly - ABS Flange


Pro GEN II Shower Drain Assembly - ABS Flange




Support Page

Description

This is a Pro GEN II shower drain assembly with an ABS flange. The robust Pro GEN II shower drain flange is rated to withstand 780 PSI of pressure vs. the competition’s rating of 250 PSI.

In addition to the ABS flange, this item includes 1 low profile riser, 1 riser ring, 1 easy-to-clean integrated hair trap, and 1 yellow construction cover.

Specifications

Performance

Drain Assembly Pressure Rating 780 psi

Identifiers

SKU SH-270078
UPC (GTIN-12) 881308061005

Customer Questions & Answers

Shower Kits has 14 Questions and Answers.

Don't see the answer you're looking for? Post your question

Why is modified thinset better for my installation?

Modified thinsets are stronger once cured. Most have additional anti-crack features, and better initial tack/grab (AKA less “slump”). They also are required for use with porcelain and glass tile.

6 people found this helpful.  Did you find this helpful? Yes No

Should I install a traditional mud kit (drypack mortar and PVC liner / mortar and membrane) or use a pre-formed foam pan?

Pre-formed pans are easily modifiable and easy to install on any substrate. They are great for DIY, as well as for a fast and clean installation by a professional. Drypack kits do not work well for tiles smaller than 2" x 2" without additional work.

5 people found this helpful.  Did you find this helpful? Yes No

What is the typical operating cost of a TempZone Shower floor heating system?

The actual cost of operating your floor heating system will vary depending upon a number of factors including the cost of electricity in your area and the length of time you run your system. The WarmlyYours TempZone™ Shower Floor Heating Mat, for example, uses 15 watts per square foot. Based on a national average electricity rate of $.10/kW/hr, the approximate operating cost of an average bathroom using this system, measuring 4' x 4' would be as little as 4 cents a day. This cost is based on running your system a full 8 hours per day. Try our Operating Cost Calculator for a quick estimate.

4 people found this helpful.  Did you find this helpful? Yes No

What additional tools and materials are needed to install a Pro GEN II shower waterproofing kit?

  • Jigsaw (for subfloor drain hole) & drill (for pilot hole)
  • Premium modified (Latex/Polymer) thinset mortar (not premixed)
  • 5-gallon bucket
  • Mixer and caulking gun
  • 3/16"x 3/16" square notch trowel
  • Margin trowel
  • Utility knife
  • PVC or ABS cement, and section of coupler pipe for connection
  • Level
3 people found this helpful.  Did you find this helpful? Yes No

How does the TempZone floor heating system work?

TempZone™ is an electric floor heating system that operates like an electric blanket for your floors. TempZone™ is covered in thinset, and is installed over the top of your shower pan and beneath your flooring. The system provides a warm, even temperature across your floor. The TempZone™ floor heating system is easy to install, operate, and maintain.

3 people found this helpful.  Did you find this helpful? Yes No

View all 14 Questions and Answers

Customer Reviews

Shower Kits achieved an average rating of 5.0 stars with 1 reviews by our customers.

Have you used this product before? Leave a review

Shower kit

Collin F., Kootenai, ID on 01/10/2021

I liked the WarmlyYours shower kit it is straight forward and easy to use. Takes one day to get your shower prepped for tile.

View all customer reviews