Contact Us Open
Loading...

Loading contact options...

Sign In
Loading...

Loading...


Never Shovel Again: High-Performance Snow Melting for a Smithtown Driveway

Seamless Winter Safety with Professional-Grade Radiant Heating in Long Island, NY

SMITHTOWN, NY
All Island Radiant - Driveway (Long Island, NY) (4)
Size: 2737 sq.ft. Voltage: 240V Wattage: 124813 W Amps: 520 A Flooring: Asphalt (new) Cost/hr *: $19.96
Living in Smithtown, New York, means facing unpredictable Atlantic winters and heavy snowfalls. For this extensive 2,737 sq. ft. driveway, the homeowners sought a permanent end to the physical toll of shoveling and the corrosive damage caused by de-icing salts. All Island Radiant stepped in to install a robust Snow Melt PowerMat system, ensuring that even during the heaviest Long Island blizzards, this asphalt driveway remains clear, dry, and safe.


Project Details

  • Location: Smithtown, NY (Long Island)
  • Heated Space Type: Outdoor Driveway
  • Square Footage: 2,737 sq. ft.
  • Surface Material: New Asphalt
  • System Specs: 124,813 Watts | 240 Volts | 520 Amps
  • Operating Cost: ~$19.96 per hour

Mastering the Elements in Smithtown

The challenge for this Smithtown property was the sheer scale of the driveway. At over 2,700 square feet, traditional snow removal was not just an inconvenience—it was a logistical hurdle. The homeowner wanted a "set it and forget it" solution that would protect their brand-new asphalt investment from the freeze-thaw cycles that cause cracks and potholes.

All Island Radiant designed a multi-zone system using WarmlyYours Snow Melt PowerMats. By embedding the heating elements directly into the asphalt, the system provides uniform heat that melts snow on contact. To manage the massive 520-amp load efficiently, the team utilized a ZoneBraker™ Multi-Zone Controller and a sophisticated Pavement Sensor. This setup ensures the system only activates when moisture is detected and temperatures are near freezing, providing maximum energy efficiency while keeping the surface bone-dry.

The result is a luxury entrance that maintains its curb appeal year-round. No more salt tracked into the house, no more plow damage to the new asphalt, and total peace of mind for the homeowners regardless of the weather forecast.

Featured Products

  • Snow Melt PowerMat: Designed specifically for the high-temperature requirements of new asphalt installations, these mats provide 50W per sq. ft. for rapid melting.
  • ZoneBraker™ Touchscreen Controller: A premium multi-zone interface that allows the homeowner to monitor and manage the large electrical load with ease.
  • Pavement Snow & Ice Sensor (SIT-6E): The "brain" of the system, this sensor detects both temperature and precipitation to trigger the system automatically.
  • In-Ground Outdoor Junction Boxes: To maintain a clean, professional aesthetic, large in-ground junction boxes were used to house the electrical connections. These durable, weather-tight units are flush-mounted, making them virtually invisible while ensuring easy access for future maintenance.
  • Large Relay Panels: To safely switch the massive 124,813-watt load, several high-capacity relay panels were installed. These industrial-grade components act as the heavy-duty switches that turn the heating mats on and off based on the signal from the ZoneBraker™ controller.

    * This high-capacity system operates at $19.96 per hour during active melting. Given that typical snow events in New York require only a few hours of operation, the cost of a clear driveway is often less than a single professional plowing service—with the added benefit of 24/7 safety and zero chemical runoff.

    Project Gallery

    Quotes

    These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

    $21,823.44 28 items
    Snow Melt Plaque (NEC Requirement) $31.85
    Snow Melt PowerMat 240V, 2 x 20 ft., 40 sq.ft., 8.33A $248.42
    Snow Melt PowerMat 240V, 3 x 30 ft., 90 sq.ft., 18.75A $928.90
    Snow Melt PowerMat 240V, 2 x 50 ft., 100 sq.ft., 20.87A $2,045.64
    Outdoor Snow Melting Junction Box - Large - In-Ground $129.35

    Frequently Asked Questions

    Based on local residential rates, this system costs approximately $19.96 per hour of use. Because the system is automated to shut off once the driveway is dry, it only runs when absolutely necessary, making it a cost-effective alternative to professional snow removal services.
    Yes! The Snow Melt PowerMat is specifically engineered to withstand the high heat and pressure used during asphalt installation. It is the ideal time to install a system when you are already planning to resurface your driveway.
    Electric systems are highly efficient because 100% of the energy is converted into heat. When paired with an automated sensor like the SIT-6E used in this project, the system avoids "ghost running," only consuming power when weather conditions require it.
    For large-scale projects (over 200 amps), a multi-zone controller like the ZoneBraker™ is best. it allows the system to manage the power draw across different sections of the driveway, ensuring the home’s electrical panel isn't overwhelmed while still providing full coverage.
    Tell Us About Your Project

    Our team of Radiant Experts is ready to help.

    Typically respond within 1 business day