Relay with built-in transformer 240V
Features
-
Connects floor heating to smart systems
-
Built-in transformer for voltage compatibility
-
Available with or without floor sensor
-
Supports 120V and 240V systems
-
Ensures precise temperature control
Floor Heating Home Automation Integration Kits Description
WarmlyYours makes it easy to connect your floor heating system to your home automation system or stand-alone thermostat with our 240 V Integration Kit. The kit includes an electric heating relay with a built-in 24V/1.2VA/Class 2 transformer. Operating at a resistive load of 22 amps at 240 V, with epoxy soundproofing to ensure quiet relay operation, this 240 V Integration Kit includes 3-wire, double-pole switching and a 12 AWG terminal wire. Its low current consumption means that a single thermostat can control multiple relays. The heating command indicator light provides for immediate verification of relay operation, and a terminal board connection allows for ease of installation. The Integration Kit is C-UL-US Listed for safety, and WarmlyYours backs it with a 3-year warranty against manufacturer defects.
Specifications
Electrical
| Connection | Double Pole, three wire |
| Connection Method | Hardwired |
| Maximum Load (Resistive Only) | 22 amps |
| Transformer Ratings | 24 VAC / 1.2 VA / Class 2 |
| Voltage | 240 V |
Controls
| Control Signal | 24VAC / 40mA / 1.2VA |
Identifiers
| Ground Fault Protection (GFCI) | No |
| SKU | INTEGRATION-KIT-240V |
| UPC (GTIN-12) | 881308047535 |
Product Dimensions
| Length | 0.1″ |
| Weight | 0.9 lbs |
| Width | 0.1″ |
Warranty / Certifications
| Warranty | 3 years |
Documents
Installation
Technical Information
Wiring Diagrams
- Generic Wiring Diagram & Instruction, Integration Kit (English)
- Generic Wiring Diagram Multiple Integration Kits 240V (English)
- Nest Integration Multi 240V Wiring Diagram and Instructions (English)
- Nest Integration Wiring Diagram and Instructions (English)
- Savant Integration Wiring Diagram and Instructions (English)
- Wiring-Diagram-WIFI-8000-INTEGRATION (English)
Sell Sheets
Frequently Asked Questions
Showing all 5 questions
Most low voltage HVAC thermostats are OK to use with tile floors. If you are heating wood, vinyl, carpet, or any other flooring products that have a "maximum temperature" limit, then low voltage HVAC thermostats are not recommended UNLESS they have an input for a floor sensor. Check with the low voltage HVAC thermostat manufacturer about floor sensor inputs first, before buying a third-party integration kit for these types of flooring products.
nJoin unit is designed to work with nSpire series thermostats. If you would like to use third-party thermostat or controller, we recommend using our Integration kits that will receive “call for heat” and activate the floor heating.
If multiple Integration Kits are needed, we suggest using 240V Integration Kits and 240V heating elements. See our support area for the appropriate diagram.
WarmlyYours suggests contacting the manufacturer of the home automation system to determine compatibility or how it recommends operating an electric floor heating system.
If the smart thermostat cannot process a floor sensor reading, it is not compatible and the integration kit will not resolve this.
