Contact Us After Hours

Loading contact options...

Sign In

Loading...

Slab Heating Mat 120V, 1.5′ x 36′, 54 sq.ft., 9.0A

5.00
Based on 2 reviews
$639
Need help? Call our experts at (800) 875-5285
Get an Instant Quote
Support Page
Jump to

Features

  • 10 Year Warranty
  • Our systems are cUlus listed, Gfci protected and RoHs Compliant
  • No pipes, boilers, tubing, tanks, or noisy pumps to install
  • 10-year warranty covers defects in workmanship and materials
  • 20W per square foot operation for energy efficient comfort

Slab Heat Mats Description

With WarmlyYours’ slab heating mats, you can design yourconcrete floors to be as warm and functional as they are attractive. Our120 V 1.5 x 36 ft. Slab Heating Mats allow for easyinstallation to add radiant warmth where you need it. With CSA approval for installation in the U.S.and Canada and a 10-year warranty from WarmlyYours, they provide 54 ft²of heating coverage. These slab heatingmats feature a twin-conductor heating cable and yield 20 watts per sq. ft. at9 A.

Specifications

Electrical

Amps 9 A
Floor Load 1.08 kW
Ohms 13.33 Ω
Thermal Power 1.08 kW
Voltage 120 V
Watts 1080 W
Watts Per Sq. Ft. 20 Watts Per Sq. Ft.

Warranty / Certifications

Approvals cCSAus Listed
Warranty 10 Year Warranty

Performance

BTU Per Hour 3685 Btu

Product Dimensions

Cold Lead Length 20′
Coverage 54 ft²
Heating Element Thickness ¼″
Length 36′
Size 1.5′ x 36′
Weight 14.6 lbs
Width 1′ 6″

Installation

Floor Types Installs in concrete

Identifiers

SKU WSHM-120-15036
UPC (GTIN-12) 881308020866

Logistics

UNSPSC Code 40101830

Cabling Specs

Wire Energy efficient twin-conductor

Frequently Asked Questions

Showing all 5 questions

While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.

41 people found this helpful Was this helpful? Yes No

Our electric radiant floor heating systems have withstood rigorous safety testing and earned the UL listing. They produce much less EMF than common household appliances like your TV or vacuum cleaner. The EPRI (Electric Power Research Institute) tests all electrical devices and publishes the data. Many common household appliances are tested at a distance of 6 inches. The test results indicate that on average, the EMF emitted for the following appliances, measured in Milligauss (mG) units, is:

Vacuum Cleaner: 300 mG

Microwave: 200 mG

Portable Heater: 100 mG

Dishwasher: 20 mG

Washing Machine: 20 mG

WarmlyYours TempZone™ (Twin): 1.8 mG

32 people found this helpful Was this helpful? Yes No

The floor heating systems are offered in both 120 volt and 240 volt for the North American market. A 208 volt breaker panel can also accommodate our 240 volt floor heating system. It is important to note that the energy consumption will be the same: a 240 volt system will not cost more to operate than a 120 volt system. You are billed in kilowatts, and the 120 volt and 240 volt systems use the same amount of kilowatts. WarmlyYours often specifies a 120 volt system in smaller projects while a 240 volt system is typically recommended for larger projects (120 square feet of electric floor heating coverage or more). The benefit of switching to a 240 volt system is the reduction in amperage. Our programmable thermostat can control a radiant floor system up to 15 amps. The 120 volt system will reach 15 amps at 120 square feet of electric floor heating coverage. However, the 240 volt system will reach 15 amps at 240 square feet of electric floor heating coverage, allowing a much larger system to be connected to the thermostat. For installations over 240 square feet, a relay contactor or power modules are needed.

26 people found this helpful Was this helpful? Yes No

Yes. Unlike the heating cable for electric floor heating, the cold lead wires can be trimmed.

22 people found this helpful Was this helpful? Yes No

To prevent any melting, ensure that the heating wire is at least 4” from the toilet wax ring.

17 people found this helpful Was this helpful? Yes No

Customer Reviews

View More Reviews