This is a great product to maintain a consistent temperature for my Sulcata tortoises during these cold months and even cool evenings in the summer.
Very pleased. Thank you
Contact Us Open
Loading contact options...
Sign In
Loading...
Turn that hard-to-heat areainto comfortable living space your family will enjoy. WarmlyYours Slab HeatingMats make it easy to add radiant warmth to concrete floors in room additions,basements, and more. The 120 V 1.5 x 56 ft. slab heating matfeatures a twin-conductor and is cCSAus approved for safety. These mats operateat 14 A to provide 84 ft² of heating coverage at 20 watts per sq. ft.WarmlyYours backs our slab heating mats with a 10-year warranty to ensure yoursatisfaction.
| Amps | 14 A |
| Floor Load | 1.68 kW |
| Ohms | 8.57 Ω |
| Thermal Power | 1.68 kW |
| Voltage | 120 V |
| Watts | 1680 W |
| Watts Per Sq. Ft. | 20 Watts Per Sq. Ft. |
| Approvals | cCSAus Listed |
| Warranty | 10 Year Warranty |
| BTU Per Hour | 5732 Btu |
| Cold Lead Length | 20′ |
| Coverage | 84 ft² |
| Heating Element Thickness | ¼″ |
| Length | 56′ |
| Size | 1.5′ x 56′ |
| Weight | 17.1 lbs |
| Width | 1′ 6″ |
| Floor Types | Installs in concrete |
| SKU | WSHM-120-15056 |
| UPC (GTIN-12) | 881308020880 |
| UNSPSC Code | 40101830 |
| Wire | Energy efficient twin-conductor |
Showing all 5 questions
While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.
Our electric radiant floor heating systems have withstood rigorous safety testing and earned the UL listing. They produce much less EMF than common household appliances like your TV or vacuum cleaner. The EPRI (Electric Power Research Institute) tests all electrical devices and publishes the data. Many common household appliances are tested at a distance of 6 inches. The test results indicate that on average, the EMF emitted for the following appliances, measured in Milligauss (mG) units, is:
Vacuum Cleaner: 300 mG
Microwave: 200 mG
Portable Heater: 100 mG
Dishwasher: 20 mG
Washing Machine: 20 mG
WarmlyYours TempZone™ (Twin): 1.8 mG
The floor heating systems are offered in both 120 volt and 240 volt for the North American market. A 208 volt breaker panel can also accommodate our 240 volt floor heating system. It is important to note that the energy consumption will be the same: a 240 volt system will not cost more to operate than a 120 volt system. You are billed in kilowatts, and the 120 volt and 240 volt systems use the same amount of kilowatts. WarmlyYours often specifies a 120 volt system in smaller projects while a 240 volt system is typically recommended for larger projects (120 square feet of electric floor heating coverage or more). The benefit of switching to a 240 volt system is the reduction in amperage. Our programmable thermostat can control a radiant floor system up to 15 amps. The 120 volt system will reach 15 amps at 120 square feet of electric floor heating coverage. However, the 240 volt system will reach 15 amps at 240 square feet of electric floor heating coverage, allowing a much larger system to be connected to the thermostat. For installations over 240 square feet, a relay contactor or power modules are needed.
Yes. Unlike the heating cable for electric floor heating, the cold lead wires can be trimmed.
To prevent any melting, ensure that the heating wire is at least 4” from the toilet wax ring.
Chat with us
Replies in under an hour
Your recent conversations
Email you this conversation?
We couldn't confirm your browser, so the message wasn't sent — an ad blocker or privacy extension is the usual cause. Please try again, or call us on the number at the top of the page.