Contact Us After Hours

Loading contact options...
Sign In

Loading...

Snow Melt Cable 240V, 18.75A, 377 ft.

5.00
Based on 33 reviews
Need help? Call our experts at 800-875-5285
How Much Cable Will I Need?
How Much Cable Will I Need?

The amount of cable you'll need depends on the heat output and amount of heating coverage you want, both of which are impacted by the spacing of the heating cable.

The recommended spacing for snow melting cables is 3", which will provide a heat output of 48-watts per sq. ft.

You can use our quote tool to get a rough estimate of the amount of cable you'll need for a project.

Get Started

Or contact us for help:

You can also submit a drawing of your project (with dimensions) and we'll provide you with a free installation plan with the exact amount of cable you'll need. Get started

Get an Instant Quote
Support Page

Features

  • Automated snow and ice removal
  • Suitable for driveways and patios
  • Roof and gutter de-icing options
  • Energy-efficient and reliable
  • Easy installation for various surfaces

Snow Melt Cables Description

Protect your family and your investment. WarmlyYours snow melting cable installs in asphalt, concrete or mortar under pavers to safely and effectively remove snow and ice without causing damage to decorative surfaces or landscaping. 

The 377 ft. 240 V twin conductor heating cable is perfect for unusually shaped patios, walkways or stairs. It measures ¼” (6mm) in diameter and generates 12 watts per lineal foot and includes 20 foot (6m) of 14 AWG cold lead to adapt to the needs of your installation. 

All WarmlyYours snow melting cables are CSA certified for outdoor use in the U.S. and Canada.

Specifications

Electrical

Amps 18.75 A
Ohms 12.8 Ω
Voltage 240 V
Watts 4500 W
Watts Per Linear Ft. 11.93 W
Watts Per Sq. Ft. at 3 Inch Spacing Up to 50
Watts Per Sq. Ft. at 4 Inch Spacing Up to 38.5
Watts Per Sq. Ft. at 5 Inch Spacing Up to 31.5

Warranty / Certifications

Approvals cCSAus Listed
Warranty 10 years

Performance

BTU Per Hour 15355 Btu

Product Dimensions

Cold Lead Length 20′
Coverage at 3 Inch Spacing 94.3 ft²
Coverage at 4 Inch Spacing 125.7 ft²
Coverage at 5 Inch Spacing 157.1 ft²
Heating Element Thickness 1/4″
Height 0.25″
Length 377′
Weight 18.4 lbs
Width 0.25″

Appearance

Color Green

Identifiers

SKU WHCA-240-0377
UPC (GTIN-12) 881308011376

Installation

Surface Types Asphalt, concrete or in mortar under pavers

Logistics

UNSPSC Code 40101842

Installation Plans

This is a real example of an installation plan that uses this product. If you want to design your own room or have any questions, please contact us.

Flooring
Paver Subfloor
N/A Voltage
240V Operating Cost
150 cents per hour
Design Your Own Project Get a Free Quote

This Installation Plan Includes:

2 x
Snow Melt Cable 240V, 20.87A, 428 ft.
1 x
Snow Melt Plaque (NEC Requirement)
1 x
Advanced Snow and Ice Melt Control - 100-277VAC
1 x
Outdoor Snow Melting Junction Box - Small - In-Ground
1 x
Sensor Snow Melt Aerial-Mounted
1 x
Small Relay Panel, (2x) 2-Pole

Frequently Asked Questions

That depends on a number of variables (like the temperature outside) but generally speaking these snow melting systems are designed to melt 1" - 3" of snow per hour. Anything above 3" per hour is typically considered blizzard conditions. 

25 people found this helpful Was this helpful? Yes No

Never cut the heating cable. A heating cable will not work if it has been cut. If the heating cable is too long, call WarmlyYours to consult with a technician who will guide you in utilizing the additional length of cable.

18 people found this helpful Was this helpful? Yes No

The material costs are similar. However, electric systems are easier to install, with fewer components and significantly lower maintenance costs. Electric systems will run for a shorter period of time to give the same level of performance but with much higher energy efficiency (typically 95%-98% efficient). Controls and sensors required for the two types of systems are very similar. Electric systems do not usually require slab insulation and do not create the concerns typically associated with hydronic systems. These concerns include, but are not limited to, return temperatures, flue gas venting, waterway shrinkage and property damage caused by leaking pipes or tubes.

15 people found this helpful Was this helpful? Yes No

When installing outdoor WarmlyYours snow melting cables for your driveway, patio, walkway, terrace, stairs, ramp, etc. - NEVER cross, overlap, or allow the heating cables to touch each other. Doing so will quickly cause a circuit failure due to excessive heat build up. Always follow the installation instructions and/or design layout plan to ensure the cable is installed with the correct spacing required for proper operation.

14 people found this helpful Was this helpful? Yes No

Our systems can handle low temperatures, but many controls come equipped with a Low-Temperature Lockout Feature. This feature prevents the system from running in very low temperatures. At very low temperatures it can become difficult for the system to effectively melt the snow. It is however possible to turn off this feature should you need the system to keep running during such low temperatures.

14 people found this helpful Was this helpful? Yes No

Customer Reviews

5.00
Based on 33 reviews
Loading reviews...