Advanced Snow Melt Control - 100-277VAC


Advanced Snow Melt Control - 100-277VAC

$969.00





Support Page

Available on Amazon

  • Voltage: 100 - 277 VAC; 50/60 hz, 30 Amps
  • Features weather-resistant NEMA 4X enclosure
  • Supports up to 2 sensors (aerial, gutter, or pavement)
  • Automatic and manual override operator controls
  • 2-year warranty

Advanced Snow & Ice Melt Control Description

The SCA-DUAL provides for advanced control of snow melting and roof and gutter deicing systems to minimize operating costs. It operates electrically- and mechanically-held contactors for pilot duty applications. With automatic and manual override operator controls, the SCA-DUAL includes an adjustable hold-on timer to continue heater operation up to 8 hours after snow and ice accumulation stop to ensure complete melting. Featuring a weather-resistant NEMA 4X enclosure, this unit handles resistive loads up to 30 amps and operates at 100 - 277 Vac and 50/60 Hz. The SCA-DUAL is cULus listed. Additionally, it has a maximum 2 sensor capability and can be used with aerial, gutter, or pavement sensors. 

Specifications

Features

Adjust After-Run Time true
Air Temp Sensor true
Automatic true
Moisture Sensor true
Outdoor Rated true

Warranty / Certifications

Approvals cULus listed
Area of Use Non-hazardous locations
Ingress Protection (IPxx) Rating IP66
Warranty 2 years
Waterproofing NEMA 4X

Electrical

Compatible Sensors and Accessories RCO, AIR-SS, GTR-SS, SC-SS-PAV-6E-KIT
Connection Method Hardwired
Control Options Automatic with manual override
Max Number of Sensors 2
Maximum Current 30 A
Mounting Method Wall Mounted
Voltage 100 - 277 VAC

Product Dimensions

Depth 4.375 in / 112 mm
Height 5.5 in / 140 mm
Width 8.125 in / 207 mm

Identifiers

SKU SCA-DUAL
UPC (GTIN-12) 881308034412

Customer Questions & Answers

Advanced Snow & Ice Melt Control has 26 Questions and Answers.

Don't see the answer you're looking for? Post your question

Is it okay to cut the heating cable if it is too long for the application for which it was designed?

Never cut the heating cable. A heating cable will not work if it has been cut. If the heating cable is too long, call WarmlyYours to consult with a technician who will guide you in utilizing the additional length of cable.

11 people found this helpful.  Did you find this helpful? Yes No

How does the electric snow melting system compare to hot water tubing (hydronic) systems?

The material costs are similar. However, electric systems are easier to install, with fewer components and significantly lower maintenance costs. Electric systems will run for a shorter period of time to give the same level of performance but with much higher energy efficiency (typically 95%-98% efficient). Controls and sensors required for the two types of systems are very similar. Electric systems do not usually require slab insulation and do not create the concerns typically associated with hydronic systems. These concerns include, but are not limited to, return temperatures, flue gas venting, waterway shrinkage and property damage caused by leaking pipes or tubes.

8 people found this helpful.  Did you find this helpful? Yes No

Does the factory splice need to be completely embedded during installation?

Yes. The manufacturer's splice that connects the heating element to the cold lead should be entirely embedded in a noncombustible material (like asphalt, concrete, or mortar) within the outdoor surface that is being heated. 

7 people found this helpful.  Did you find this helpful? Yes No

May I cross or overlap the heating cable?

Never cross, overlap, or allow the heating cables to touch each other. Doing so will quickly cause a circuit failure due to excessive heat build up. Always follow the product instructions and/or design layout plan to ensure the cable is installed with the correct spacing required for proper operation.

4 people found this helpful.  Did you find this helpful? Yes No

May I cut the cold lead wires?

The electrician may shorten the cold lead wires during the installation. Any lead wire extensions/splices must be made in a junction box in accordance with the installation instructions, and must comply with all national and local electrical codes. Never cut the heating cable.

4 people found this helpful.  Did you find this helpful? Yes No

View all 26 Questions and Answers

Customer Reviews

Advanced Snow & Ice Melt Control achieved an average rating of 5.0 stars with 5 reviews by our customers.

Have you used this product before? Leave a review

Mary knows her stuff. If she doesn't know , she calls you bac

Ken S., Commerce Township, MI on 09/28/2022

Mary knows her stuff. If she doesn't know , she calls you back within minutes with an answer.

Learning Curve

Scott R., Omaha, NE on 02/01/2022

There is definitely a learning curve but after that it was great to see the finished product working. Customer was extremely happy.

Your online and telephone support system is the greatest!

Bonnie P., Sterling, AK on 10/17/2021

We just finished laying in the wire and poured our cement, just a day before it started snowing-so we are curing the cement as I type. The men are now hooking up the electrical inside portions. The instructions have been so easy to follow step by step. I wanted to let you know it was so easy, I decided to do the one side of my garage with both systems to have a longer driveway of warmth/snow melt...because it was so cost effective that our family man-power did the labor. I plan on contacting you next Spring after the thaw to order up more wire, etc to do the smaller 14 foot section, which will be turned into a bedroom with a big front window I hope to enjoy looking out during the winter, instead of looking at by past 6 foot snow falling off my roof and building a wall I can't see through. I will send the end result after the electrical is finished plus a photo. :):)

Excellent Customer Service and Support

Richard L., Budd Lake, NJ on 02/15/2021

Working with WarmlyYours was great. The Customer Service Agent was knowledgeable, responsive and pleasant. All my questions were clearly answered promptly by the Technical Support Team. I would highly recommend this company for all of your floor and outdoor heating projects! Thank you

Installed myself, works great!

Michael S., Ellicott City, MD on 02/15/2021

I purchased a Transfer Switch box (12 x 120 volt), a snow sensor, and an ice sensor, and installed them myself as per instructions. I had a couple questions (how to connect two "yellow wires" and where to best position the snow sensor), both answered immediately by a quick phone call. I couldn't be happier.

View all customer reviews
* Example payment is based on the listed product price(s) assuming a 24 month term loan and a 9.99% APR. Subject to approval of credit application. Rates range from 0.00% to 29.99% APR. APRs will vary depending on credit qualifications, loan amount, and term. Bread® pay over time loans are made by Comenity Capital Bank.