Say Goodbye to Shoveling: A Heated Driveway Solution in Elmsdale, Nova Scotia

A Retrofitted Asphalt Driveway Upgraded with a Concrete Tire-Track Snow Melt System

ELMSDALE, NS
Asphalt driveway retrofit with snow melting tire tracks wide shot
Size: 900 sq. ft. Voltage: 240V Wattage: 40072 W Amps: 167 A Flooring: Concrete (retro-fit/existing) Cost/hr *: $7.44

Heavy snowfall in Elmsdale, Nova Scotia, made clearing this large asphalt driveway a constant, back-breaking chore. Kel-Greg Enterprises Ltd. installed a powerful 800-square-foot WarmlyYours electric snow melting system within newly poured concrete "tire tracks." This efficient retrofit provides the homeowner with a safe, ice-free, and convenient driveway all winter long, eliminating the need for shoveling or corrosive de-icing chemicals.


Project Details

  • Location: Elmsdale, Nova Scotia
  • Heated Space Type: Driveway (Tire Tracks)
  • Square Footage: 800 sq. ft.
  • Power: 40,072 Watts, 240 Volts, 167 Amps
  • Operating Cost: $7.44 per hour (when active)
  • Products Used: Snow Melt Mats, Snow and Ice Melting Control Premium (SCP-120)
  • Installer: Kel-Greg Enterprises Ltd.

A Smart Retrofit for Winter Peace of Mind

For homeowner Keith Flynn in Elmsdale, NS, winter meant a constant battle with snow and ice on his large driveway. The challenge was finding a reliable, automated solution that didn't require replacing the entire surface. The goal was to create safe, clear paths for vehicles without the daily labor of shoveling or the property damage caused by salt and chemicals.

The expert team at Kel-Greg Enterprises Ltd. was contracted for this smart retrofit. Instead of a full demolition, they strategically cut into the existing asphalt to create paths for tire tracks. New concrete was then poured to house eight 100-square-foot WarmlyYours Snow Melt Mats. This 800-square-foot system, running on a robust 240V circuit, was designed for maximum efficiency by heating only the most critical travel areas of the driveway.

The entire system is powered by a premium SCP-120 snow and ice melting control. This "set it and forget it" controller uses an integrated sensor to automatically activate the mats only when it detects both moisture and freezing temperatures. The result is a powerful, hands-free snow melting system that keeps the driveway tracks clear and safe, adding immense value, safety, and convenience to the home.


Featured Products

  • Snow Melt Mats These powerful, durable mats are designed for easy roll-out installation in new concrete, asphalt, or paver applications. They provide 50 watts per square foot (at 240V) for fast, effective snow melting.
  • Snow and Ice Melting Control This premium, automatic control ensures maximum efficiency. It uses an integrated sensor to activate the system only when it detects both moisture and freezing temperatures, so it never runs when it's not needed.

* This powerful 800-square-foot snow melting system costs an estimated $7.44 per hour to operate at full power, based on local Nova Scotia electricity rates. A typical 4-hour snow event would cost just under $30 to clear completely.

Project Gallery

Quotes

These quotes are linked to this showcase and include the products used in this project or recommended for a similar-sized project.

Frequently Asked Questions


Operating cost depends on system size and local electricity rates. This 800-sq. ft. system in Nova Scotia costs about $7.44 per hour while active. Because it only runs during snow or ice events, the total seasonal cost is often more affordable than seasonal plowing contracts.
Yes, this project is a perfect example of a "retrofit." While mats cannot be installed under an existing driveway, you can cut into the asphalt (as done here) to lay new concrete or paver "tire tracks" with an embedded system. Alternatively, the system can be installed during a full asphalt or concrete replacement.
Electric snow melting systems are designed to be embedded in materials that conduct heat well. This includes new concrete (like this project), asphalt (new pour), and stone or brick pavers (set in a sand bed over the mats).
Modern heated driveways are highly efficient because they deliver heat directly to the surface. When paired with an automatic controller like the SCP-120, the system only activates when snow is detected, preventing wasted energy and providing targeted, on-demand snow removal.

Featured Products

Tell Us About Your Project Our team of Radiant Experts is ready to help.

Contact Us

Have a question? We're here to help.

Add Photo or Floor Plan

By submitting this form, I understand and agree to WarmlyYours.com's Terms of Use and Privacy Policy.

Please complete the security verification below:

Your information is secure and will never be shared