Ice Shield: DIY Roof and Gutter Deicing Kit (200’)
Part Number: ETC120-5W-200-WY
This support page provides publications, manuals, specifications, videos, support articles, and common support questions
This support page provides publications, manuals, specifications, videos, support articles, and common support questions
Common Support Questions (10)
Publications and Manuals (2)
Specifications (25)
Videos (2)
Articles (6)
Similar Items (8)
Create a new Support Request
Shop Now
Common Support Questions
Do radiant heating products have polarity?
Electric-resistance heating cables and systems have no polarity. This includes all current WarmlyYours heating elements.
Need more help? View support options
Why a GFEP (GEFP, RCCB, or heat trace circuit breaker) and not a GFCI breaker for WarmlyYours outdoor deicing and snow melting systems?
This National Electric Code (NEC) required protection for fixed outdoor deicing and snow-melting equipment may be accomplished by using circuit breakers equipped with ground-fault equipment protection (GFEP) of 30 mA. It is important to understand that this required equipment protection is not the same as a 5 mA GFCI used for personal protection.
Need more help? View support options
Can I run Roof and Gutter Deicing Cable off an extension cord?
NEVER use an extension cord. If you do not understand the electrical requirements needed regarding the electrical receptacle plug, contact your local electrical inspector or a licensed electrician.
The reason for this is due to safety and performance of the system. Extension cords are often not properly selected and will degrade, potentially leading to electrical shorts or other hazards such as fire. Roof de-icing cables are designed to be connected directly to a properly rated outlet, and the length and type of extension cords may not be rated for the same power load, leading to insufficient power supply, potential damage to the cables, and further safety risks including their ability to prevent ice dams on your roof.
Need more help? View support options
What is the lifespan of WarmlyYours roof and gutter deicing cables?
WarmlyYours roof and gutter deicing self-regulating cable loses its power ramp-up ability at about 5-10 years, but it will still work at its rated wattage for years. Properly installed WarmlyYours roof and gutter constant wattage cable usually lasts well beyond its warranty period.
Need more help? View support options
Can I install a roof and gutter deicing system on a 'ribbed' metal roof?
WarmlyYours does not recommend installing de-icing systems on ribbed metal roofs. This is because ribbed metal roofs typically aren’t flat enough to attach the mounting pads to properly connect the cables with the roof.
Need more help? View support options
Can constant wattage cable be installed on rubber roofing?
Do NOT use WarmlyYours constant wattage ice shield roof and gutter cable on rubber or rubber-membrane roofs.
Need more help? View support options
How far apart are the triangles spaced from one another at the roof edge near the gutter for WarmlyYours constant wattage deicing cable?
Triangles are spaced 15" apart.
Need more help? View support options
I have leaf guards installed on my gutters. Can I attach the deicing system to the side, or underside of my gutters?
No, typically leaf guards need to be removed for the deicing cable to be installed in the gutter to work effectively.
Need more help? View support options
The neutral on GFEP/GEFP/RCCB 240V breakers is not used, why do I need this then?
A 2 pole single-phase 240V circuit works by continuously monitoring the current flowing through both hot wires of the circuit. If it detects even a slight imbalance between the current on each hot wire (indicating a ground fault), it will quickly trip, cutting off power to the circuit. Essentially, it compares each leg of the 240V circuit and trips if they are not precisely equal.
Need more help? View support options
What is the difference between Self-Regulating and Constant Wattage Cabling?
As the names imply, constant wattage cable uses fixed wattage output per linear foot and does not automatically adjust in response to temperature changes. Self-regulating cable is manufactured with a resistance matrix placed between its 2 buss wires that varies the ohms resistance per linear foot to automatically adjust in response to temperature changes. Learn more about this in our blog Self-Regulating vs. Constant Wattage Heating Cables.
Need more help? View support options
Publications and Manuals
Specifications
Electrical
| Amps | 8.3 A |
| Cable Construction | Twin conductor |
| Cable Type | Constant Wattage |
| Conductor Insulation | XLPE |
| Connection Method | Plug-in |
| Ohms | 14.4 Ω |
| Outer Insulation | PVC |
| Plug-Type | NEMA 5-15 (Type B) |
| Plug-in Cord Length | 6′ |
| Voltage | 120 V |
| Watts | 1000 W |
| Watts Per Ft. | 5 watts per linear ft. |
Warranty / Certifications
| Approvals | cUL Listed, CSA Listed, and cETLus Listed |
| Warranty | 2 Year Warranty |
Product Dimensions
| Cable Cross Section | 1/4" x 3/16" |
| Cold Lead Length | 6′ |
| Heating Cable Length | 200′ |
| Height | 0.1875″ |
| Length | 2400″ |
| Weight | 7.8 lbs |
| Width | 0.25″ |
Installation
| Minimum Bend Radius | 1″ |
| Minimum Installation Temperature | 15°F (-10°C) |
Identifiers
| SKU | ETC120-5W-200-WY |
| UPC (GTIN-12) | 881308071981 |
Videos
Product Line Videos
Articles
Data for Constant Wattage Roof & Gutter Kits
De-Icing Ribbed Metal Roofing
Double-sided tape for roof and gutter clips Fail, Rolled Roof
Roof and Gutter not suitable for snow load removal
Roof Gutter Cable Triangle Width
SCE-AMB-SS Sensor wiring (OJ ETF-7)
De-Icing Ribbed Metal Roofing
Double-sided tape for roof and gutter clips Fail, Rolled Roof
Roof and Gutter not suitable for snow load removal
Roof Gutter Cable Triangle Width
SCE-AMB-SS Sensor wiring (OJ ETF-7)
Similar Items
Do you need support or specifications for a specific model? Identify your model below.