Contact Us After Hours

Loading contact options...

Sign In

Loading...

Snow and Ice Melting Timer Control

$629
  • Reliable manual control
  • Timer adjustable up to 12 hours
  • Useable with snow melting or roof and gutter deicing systems
  • Extremely easy operation
  • Terminal block and removable knockouts for easy installation
Need help? Call our experts at (800) 875-5285
Support Page
Jump to

Timer Control Snow & Ice Melt Description

The WarmlyYours SCM-DUAL Snow and Ice Melting Timer Control is a simple, affordable option for snow melting, slab heating, and roof and gutter deicing systems. At120V operational voltage, this unit features a 12-hour, adjustable timer and a NEMA 1 enclosure with hinged cover. 

The operation of this control couldn't be easier as the user can simply turn the timer to their desired heating duration. It includes a 2-pole relay and terminal block for easy wiring. This control comes with integrated removable knockouts (4 on each side) so that you can run conduits through them without having to cut the metal box. 

For projects with a smaller amperage draw (20 Amps for 120V or 10 Amps for 240 - 277V), the SCM-DUAL can be used without a relay panel. However, for projects with larger amperage draws, the controller must be used with a compatible relay panel. Using a relay panel, sold separately, allows control of larger jobs and can help switch voltages ranging from 120V to 277V.

Specifications

Electrical

Applicable Voltages 120 V, 240 V, 277 V
Connection Method Hardwired
Ingress Protection (IPxx) Rating IP20
Knockouts Available Yes
Maximum Current Description 20 Amp, 120 VAC, 50/60 Hz; 10 Amp, 240 VAC, 50/60 Hz; 10 Amp, 277 VAC, 50/60 Hz
Maximum Load (Resistive Only) 20 Amp, 120 VAC, 50/60 Hz; 10 Amp, 240 VAC, 50/60 Hz; 10 Amp, 277 VAC, 50/60 Hz

Warranty / Certifications

Approvals cULus listed
Compliances UL-50 Type 1, CSA Type 1, NEMA Type 1, IEC 60529, IP20
Warranty 2 years

Installation

Best Use Typically Used For Projects That Require On-demand Operation

Product Dimensions

Depth 4″
Height 6″
Weight 5.8 lbs
Width 6″

Appearance

Finish ANSI 61 gray powder coating

Identifiers

SKU SCM-DUAL
UPC (GTIN-12) 881308064440

Frequently Asked Questions

Showing all 5 questions

GFEP is the National Electric Code (NEC) required protection for fixed outdoor deicing and snow-melting equipment, which may be accomplished by using circuit breakers equipped with ground-fault equipment protection (GFEP) of 30 mA. It is important to understand that this required equipment protection is NOT the same as a 5 mA GFCI used for personal protection.

11 people found this helpful Was this helpful? Yes No

When the design requirement's amp draw exceeds the selected controller's capacity.

5 people found this helpful Was this helpful? Yes No

It depends on how the system is intended to operate. If the expectation is manual operation (ex. WiFi or Timer Control), then no sensors are required. If the expectation is automatic operation, then the system will require at least one snow sensor.

2 people found this helpful Was this helpful? Yes No

Ground fault equipment protection (GFEP) is intended to provide protection for equipment against damaging line-to-ground currents by disconnecting all ungrounded conductors of the faulted circuit.

2 people found this helpful Was this helpful? Yes No

No, a sensor is not required with the snow melt system. However, certain automatic controllers require a temperature/moisture sensor to sense atmospheric conditions and may also require an in-slab, high temperature limit sensor to be installed (notably, asphalt installations).

1 person found this helpful Was this helpful? Yes No

Customer Reviews

View More Reviews