Thermostat Prog Honeywell 120V HWF1GA-15-120


Part Number: HWF1GA-15-120
This support page provides publications, manuals, specifications, videos, support articles, and common support questions


question-mark
Common Support Questions (5)

publication
Publications and Manuals (0)

specifications
Specifications (9)

Videos (1)

Articles (3)

Related Items (1)

Create a new Support Request

Common Support Questions


The breaker and wire sizes are selected based on the total amperage of the WarmlyYours heating system connected to a single thermostat. This information is on the WarmlyYours heating system's installation plan, electrical plan, or UL label. Based on guidelines from the National Electrical Code: loads up to 16 Amps may utilize 12 gauge wire with a 20-Amp breaker, and loads up to 12 Amps - 14 gauge wire with a 15-Amp breaker. Local code and/or other factors may change these guidelines.

Need more help? View support options

Turn off at the circuit breaker.  Alternatively, the TH111 can be put in vacation mode by simultaneously pressing the sun and moon buttons.  To program the vacation temperature, select the desired degree and press on the sun and moon buttons simultaneously (aprx. 3 seconds) until the suitcase icon is displayed.

Need more help? View support options

Solution:

The ground wire in the floor mat must be connected directly to the ground wire of the supply or to the house ground wire.


Need more help? View support options

All thermostats are mandated at 42" height for handicap accessibility, most private residences are mounted at 52-60".

Please see this video on how to install a WarmlyYours nSpiration Series thermostat: https://www.warmlyyours.com/video-media/wire-nspiration-thermostat-to-electric-floor-heating-roll

Need more help? View support options

If your thermostat is blank, the first thing to do is to test to see if voltage is present at the rear of the thermostat. If no power is reaching the thermostat, please inspect the circuit breaker powering the thermostat in the breaker panel, and verify that the breaker is a non-GFCI type. If it is a GFCI breaker, replace it with a non-GFCI breaker. If there is power entering the thermostat and it is blank, it will need to be replaced.

Need more help? View support options


Publications and Manuals



Specifications


Electrical

Connection Method Hardwired
Voltage 120 VAC

Logistics

Country of Origin (COO) China

Product Dimensions

Depth 2 in
Installed Depth 0.75 in
Length 0.1″
Width 0.1″

Identifiers

SKU HWF1GA-15-120

Warranty / Certifications

Warranty Limited 3-year warranty and lifetime technical support

Videos



Articles




Speak to a radiant heating expert


Can’t find what you’re looking for? Create a Support Request