Perfect for Spot Heating

Floor Types
Tile, Marble, Stone, Nailed Hardwood
Heated Area
9 sq. ft.

Call Us 1-800-875-5285

Everything you need to install floor heating where you need it most.

  • TempZone™ Flex Roll 1’ X 9’ (Single Conductor)
  • EasyStat Non-Programmable Thermostat
  • Circuit Check
Price $441 $199
Over 50% Off!

Spot heating, or adding electric underfloor heating to targeted areas of your home, is the ultimate in home comfort customization.

We all have our routines — from getting ready for work in the morning to unwinding after a long day. Spot heating allows you to extend some much needed comfort and luxury exactly where you need it.

What's Included?

TempZone™ Flex Roll Single Conductor
TempZone™ Flex Roll Single Conductor 1’ X 9’ (9 sq. ft.)

Ideal for installation under tile, stone, marble, and nailed hardwood floors, TempZone™ Flex Rolls add radiant warmth and comfort to any room.

  • 120 Volts
  • 15 Watts per sq. ft.
  • 1.13 Amps
  • 25-year No Nonsense Warranty™
EasyStat™ Non-Programmable Thermostat

The WarmlyYours EasyStat™ Non-Programmable Thermostat provides for simple operation of your electric floor heating system — just enter the floor temperature you desire and enjoy. The EasyStat™ includes an in-floor sensor and built-in GFCI for safe operation. It comes with a 3-year warranty and is available in 120V and 240V configurations with Fahrenheit or Celsius temperature settings.

Circuit Check

This exclusive tool was developed by WarmlyYours to give you peace of mind and ensure trouble-free installation of your radiant floor heating system.


We installed this in a bathroom about 10 years ago and it is still working great today! Nice heat, nice thermostat and very reliable.

— ColeClarkston, MI

Easy to install. Never a problem!

— Jeff ScruggsOklahoma City, OK

Customer service team with WarmlyYours is absolutely incredible.

— RayCalgary, A.B.

I appreciate how easy it is to peel the tape off mesh and move wire around different obstacles in room. Great product!

— JR Tile LLCTulsa, OK

Read More

Frequently Asked Questions

Yes. The WarmlyYours TempZone™ floor heating system has withstood rigorous safety testing by the Underwriter's Laboratory and has received UL listing for the U.S. as well cUL certification for Canada. WarmlyYours offers thermostats that carry the CSA Mark and the UL listing, which certifies that the product has been tested under extreme conditions and meets applicable standards for safety and/or performance in the U.S. and Canada. All WarmlyYours thermostats contain a Ground Fault Circuit Interrupter (GFCI) which provides fail-safe protection against an electrical shock.
The actual cost of operating your floor heating system will vary depending upon a number of factors including the cost of electricity in your area and the length of time you run your system. The WarmlyYours electric floor heating system uses 15 watts per square foot. Based on a national average electricity rate of $.10/kW/hr, the approximate operating cost of an average bathroom measuring 8' x 10' would be between $.16 - $.21 cents a day. This cost is based on running your system a full 8 hours per day. Try our Operating Cost Calculator for a quick estimate.
Yes, in most cases, the TempZone™ floor heating system can be effective as a primary heat source. However, the TempZone™ system is most commonly used as a secondary heat source, providing floor to ceiling radiant heat to any room in your home where you desire more warmth and comfort. If you are considering electric floor heating for an addition to your home, such as a sunroom where you have no other source of heat, WarmlyYours offers an innovative online tool which calculates approximate heat loss. This tool can help you to determine if a WarmlyYours floor heating system will provide your desired comfort temperature throughout the year. Try our Heat Loss Calculator or you can call us at (800) 875-5285 and a Customer Service Representative will make the calculation for you.
WarmlyYours 25-Year No Nonsense™ Warranty is the most comprehensive warranty in the industry. In the event of a defect, we cover not only the repair or replacement of the TempZone™ heating roll, but also any labor and materials required to perform the repair. For all of the terms and conditions of our No Nonsense™ Warranty, please visit our TempZone™ Warranty page.
TempZone™ is comprised of a double-insulated, coaxial heating cable that is taped to a fiberglass mesh. The total thickness of the system is 3 mm x 2 mm thick and will not noticeably affect the height of your installed flooring.
The TempZone™ system is evenly spaced with a 3" serpentine loop and is designed to deliver 15 watts per square foot, which is the maximum allowed by the National Electrical Code. TempZone™ Flex Rolls allow for 25% more heating capacity as compared to many of the competitive systems to provide faster floor warm-ups.
Read More