TempZone™ 3-Watt Floor Heating Cable with Strips


Description

WarmlyYours TempZone™ 3-Watt Floor Heating Cable (Twin) brings radiant warmth and comfort to any room. This free-form cable provides the ultimate in flexibility, making it easy to customize installation for rooms of any size and shape. 

While ideally suited to provide complete floor heating coverage of rooms with unusual dimensions, the TempZone™ Floor Heating Cable (Twin) can be used in any room, providing an alternative for installers who prefer the flexibility and freedom of working with loose cable. 

TempZone™ Floor Heating Cable (Twin) is ultra-low EMF by design. It features a twin conductor with a 15’ cold lead and is available in two voltage options and a range of lengths to meet the requirements of any installation. WarmlyYours TempZone™ Floor Heating Cable (Twin) can be installed at 3” or 4” intervals.

This product is not compatible with Prodeso Cable Installation Membrane and requires the use of plastic cable strips for installation.

Customer Questions & Answers

TempZone™ 3-Watt Floor Heating Cable with Strips has 61 Questions and Answers.

Don't see the answer you're looking for? Post your question

How do I work with my electrician to install WarmlyYours electric floor heating?

While WarmlyYours electric radiant floor heating systems are typically installed by your floor covering contractor, a licensed electrician is recommended for the final thermostat hook-up. With every quote, we provide an Installation Plan layout, together with an electrical plan that has all the info required for the electrician.

32 people found this helpful.  Did you find this helpful? Yes No

Is electric floor heating safe and what about EMF?

Our electric radiant floor heating systems have withstood rigorous safety testing and earned the UL listing. They produce much less EMF than common household appliances like your TV or vacuum cleaner. The EPRI (Electric Power Research Institute) tests all electrical devices and publishes the data. Many common household appliances are tested at a distance of 6 inches. The test results indicate that on average, the EMF emitted for the following appliances, measured in Milligauss (mG) units, is:

Vacuum Cleaner: 300 mG

Microwave: 200 mG

Portable Heater: 100 mG

Dishwasher: 20 mG

Washing Machine: 20 mG

WarmlyYours TempZone™ (Twin): 1.8 mG

23 people found this helpful.  Did you find this helpful? Yes No

How can I determine what I need for my floor heating project and how can I find out what my floor heating system will cost?

You can use the Instant Quote Tool, which gives you many options for your floor heating coverage. Use this interactive tool to design your room online and receive an instant quotation with product recommendations, rough-in and installation kits, cost of your control, etc. Planning your floor heating project is made easy when using our Instant Quote Tool.

Send us your floor plan or fax it to (800) 408-1100 and we will send you a quote, product recommendation and a free custom installation plan for your project.

22 people found this helpful.  Did you find this helpful? Yes No

What type of flooring can I install along with an electric floor heating system?

WarmlyYours’ TempZone™ product is most commonly installed under tile, stone, and marble flooring, but can also be installed under many other popular floor covering options such as hardwood, vinyl and linoleum. We also have our Environ system, which is an electric floor heating product as well and is specially designed for installation under carpet (in the U.S. only), laminate and floating wood. WarmlyYours can accommodate any flooring type with either of the electric radiant floor heating products that we offer. If your flooring type isn't listed here, just give us a call at (800) 875-5285 and we will be happy to discuss it with you.

21 people found this helpful.  Did you find this helpful? Yes No

How do you keep a sunroom warm in the winter?

Sunrooms can be very cold during the winter months. While a furnace may push some warm air into the room, the large number of windows, exterior walls, and other causes of heat loss in a sunroom will typically keep it from having a comfortable temperature level. Floor heating and radiant panels will add radiant heat, which the human body absorbs faster than other forms of heat, to the room so that it feels warm even at lower temperatures.

14 people found this helpful.  Did you find this helpful? Yes No

View all 61 Questions and Answers

Customer Reviews

TempZone™ 3-Watt Floor Heating Cable with Strips achieved an average rating of 4.8 stars with 35 reviews by our customers.

floor heating, T-stat, towel warmer. pros/cons (Electrical contractor)

Electrilight L., Oakville, ON on 04/16/2023

always been 100% confident with floor heating cables and thermostats, adding an extra floor thermocouple is paramount to ensure lifespan. Never had 1 recall or trouble from 10 years of installations. only con would be the towel warmer, even though it is high quality and strong, I found the mounting hardware a bit flimsy and unforgiving (not to mention the plastic wall plugs which provide no grip in drywall. Precisely measuring all mounting points, the unit ended up crooked (even though a lazer level was used for mounting positions. Diagonally measuring the mounting points was nearly 3/4" off AND the mounting feet have 0 forgiveness, and will leave marks on the finished paint on the walls. Shame there was not a larger mounting plate. The position of hexhead screws are 3/8 from wall and clumsy to tighten without more markings on finished paint. side note, it gets hot, too hot in my opinion

Response from WarmlyYours:

Dear Electrilight, we appreciate your feedback in regard to the range of our radiant heating products. Regarding the towel warmer, we are working with our supplier to improve how precisely the units are manufactured and strengthen the quality control process.

simple install

Electrilight L., Oakville, ON on 04/16/2023

not much to say about these, but 100% confident on orders

Too hot

Elman B., Worcester, MA on 07/28/2022

The designer did not listen to my instructions. I told the salesman that the floor was highly insulated below the subfloor and that the vinyl covering had a temperature limit of 85 degrees. He specified your hottest possible arrangement for the floor size. (Three inch spacing with 3.7 watt wire and very narrow areas at the edge.) It should have had 4 or 5 inch spacing with your cooler 3.0 watt wire. ) I did not catch it until I had it for a while and was very bothered that it was too hot. Eventually I had to send it back and order a much shorter wire.

Response from WarmlyYours:

I'm sorry, we no longer stock the older-style 3 watt cable in a size that is required for your space. We apologize if there was a mixup in our discussions with you. We have historically had very good results with 3.7 watt cable spaced at 3" for enclosed porches. Enclosed porches are usually subjected to high amounts of heat loss, even if the floor is well insulated. It is better to have plenty of BTUs with some to spare than to not have enough. The thermostat that you purchased comes with a floor sensor. With the floor sensor installed in the floor, the thermostat can be set to limit the actual floor temperature to a specific temperature. This "Floor Limit" can be set to any temperature that you desire, or is required by the flooring manufacturer. The floor temperature will not exceed the value you enter, whether the wire is spaced at 3" or 4". We have found that 4" wire spacing works well in a second floor room with a heated room below, but may not have enough output for an enclosed porch. We rarely, if ever, quote 5" spacing because of "striping" of the heat which can result in cold spots in the floor. In the end, we always design a system that we believe will consistently deliver a great result. Thanks for your feedback, we appreciate it.

Caring staff

Anonymous, Mt Pleasant, IA on 06/02/2022

They verified my order before I ordered the products so i got what I needed. Speedy delivery as well

EXCELLENT PRODUCT AND SUPPORT

John W., Glendale, AZ on 12/29/2021

I had no experience installing electric radiant heating in a concrete slab, but with great advice and excellent install instructions I was able to install the cable, connect the thermostat and the system worked first time. The WarmlyYours team made it all possible by providing a drawing of where the heating cable is to be routed and all other installation instructions. Even when I made changes the WarmlyYours team quickly provided updated drawings and instructions. There is no better place to go for electric floor heating than WarmlyYours.

Floor heating for mudroom, kitchen and livingroom

Stefanie, Orillia, ON on 12/06/2021

I love the floor heating from warmlyyours. It was easy to install, the thermostat is easy to handle and overall service from the sales team was excellent. Promptly responded when I had any questions. Lots of information was available over the internet. As well I liked the fact that a technical team send me an email asking me if I needed any help before I even started the project. Instruction how to install are clear and easy to read. I would have loved to give them a 5 star rating but can only give a 4 star as we were a little confused regarding the length of the cables we needed. The drawing and actual size did not match. But Troy and his team were eager and fast to fix the problem. We tried to figure out how much cable we need for each room but the instruction " how to figure it out was really difficult for myself and my contractor who deals mostly with Nuheat ( with them you get a cable/ squarefoot table to see how much you need. I know that it varies but it gives you a better idea ) My contractor loved the little gadget which was send with the order to check if the cable is properly connected. But I thought it was overkill to send me the same gadget for each room . One would have done it and we would have saved a little money and waste. We used an master electrician to connect the system to make sure everything is done in order. Overall I would highly recommend the product. So far so good it works like a charm and it seems to put out the heat we need to be toasty. Thanks WarmlyYours :)))))))))

Very satisfying experience

Luc C., Quebec, QC on 10/03/2021

The complete drawing supplyed is complete and contained all information needed for the DIY installation that i made. The installation was easy and the material included in the kit fitted very well. This system was replacing another one and by instaling as per the recommandation the new system is more powerfull and heat-up more rapidely than the older one. They follow up after the installation, good service. Very good experience, i look forward to make another installation with this company

Easy system to use

Mad C., Guelph, ON on 07/29/2021

I've used WarmlyYours for many years. The system is so easy to use and quick to install. It has worked well with all my clients.

Excellent service and support

Amit V., Lake Zurich, IL on 07/21/2021

Couldn't have asked for better service. Jennifer worked with me on my project, right from the very first quote and while a lot of things changed through the course of the project, I had excellent support all along, accommodating all the changes and providing prompt support all along. Even with returns that I had to make unfortunately, Jennifer and the team were fully understanding and prompt with the transactions. One of those rare companies that seem to value customer satisfaction more than just making money on each customer in the short run. I plan to install heating in other rooms in the near future and I will undoubtedly make the first call to Jennifer at WarmlyYours.

Great Service and Support

Anonymous, Westfield, NJ on 06/23/2021

Great support, price and outstanding documentation including installation guide (visual and instructions).

View all customer reviews