26 Reviews

Radiant Heat Panels


Infrared Electric Wall Heaters are an excellent way to add supplemental heat to any room. Radiant heater panels work by using infrared heat to radiate warmth directly from the panel to the solid objects in the room. Not only are these wall-mounted radiant panels functional, but they are also a much more elegant and safe way to add supplemental infrared heating to an area than traditional space heaters. An infrared heating system is a great way to experience the comfort and luxury of radiant heating.


towel-warmers
Shop Models

Shop Controls

floorplan-2
Project Showcase

Contact a Radiant Panel Expert


Radiant Panel Heater Features

  • Easy to Install All of our wall heaters can be easily mounted to a wall horizontally or vertically.
  • Fastest Heat Up Time According to the U.S. Department of Energy, radiant panels have the "quickest response time of any heating technology."
  • 5 Year Warranty Our radiant panels our backed by our 5-year manufacturer warranty, that guarantees our radiant panels to be free from defects in materials and workmanship.
  • Saves Energy Electric wall heaters have one of the highest efficiency rates that reduces heating costs.
  • Fast Shipping & Simple Returns With same day shipping nationwide, we're committed to getting your order to you on time. Plus, we don't charge restocking fees for unused products.
  • Clean Heat Our vent-free heaters won't disturb dust, pollen, or other allergens like forced-air systems.
  • Safe cTUVus certified
  • 24/7 Installation Support We're here to answer your questions every day – year round – round the clock.

How do Radiant Panel Heaters Work?

If you've ever stood outside on a cold day but felt warm because you were in the sunlight, you've experienced the benefits of infrared heating. These rays from the sun heat the people and objects they come into direct contact with instead of the air. An infrared heating system operates the same way – except from inside the home. Wall mounted electric heaters work by heating the walls, ceiling and objects in a room, which store the warmth and then release it back into the room slowly and evenly. Electric wall heaters offers additional benefits over both wall mounted gas heaters and wall mounted propane heaters because of the increased level of safety and consistency in heat output.

This infrared heating technique can save energy costs and eliminate the circulation of allergens such as dust. Plus, WarmlyYours radiant panels deliver these benefits in the form of modern, stylish panels.

Learn more about how infrared radiant panels work

What Square Footage can a Wall Mounted Heater Warm Up?

A wall heater will typically be used to provide supplemental infrared heating for a room. You can kind of think of your infrared heating system as a wall mounted space heater. Use the table below to identify the typical room size* that an electric wall heater can help warm up.

Radiant Panel Wattage* Warming coverage
300W Ember 43 sq. ft.
500W Ember 71 sq. ft.
600W Ember (Glass Only) 86 sq. ft.
700W Ember 100 sq. ft.
800W Ember (Glass Only) 114 sq. ft.

*This estimation is based on installing a radiant vent-free heater in a typical/average room. Actual results may vary based on a room's degree of heat loss, which can be impacted by a number of factors including ceiling height, number of windows, and insulation level. For a free Heat Loss Calculation based on your room, go here.


Ember Glass and Mirror Radiant Panels

Our Ember Glass infrared heating panels offer a range of attractive alternatives to traditional space heaters. These wall mounted heaters come in 2 different sizes (35" x 24" and 47" x 24") and can be hung up either vertically or horizontally. Ember Glass models are available in either white or black and the Ember Mirror model can be used as a 3-in-1 option: heater, mirror, and, with the use of the towel bar accessory, a towel warmer.

Shop Ember Glass Shop Ember Mirror
Specifications
  • Dual connection, each unit can be plug-in or hardwired
  • Wall-mounted
  • Available in 2 different sizes: 35” x 24” and 47” x 24”
  • Available in Black, White and Mirror finishes

Accessories
Ember Towel Bar Starting from $69.00

Turn your Ember radiant panel into a towel warmer with a flat towel bar (available in brushed metal, black, and white finishes).


Ember Flex Radiant Panel Heaters

Our Ember Flex radiant panel heaters, with their white finish and integrated frame, are the best way to combine the high-tech comfort of infrared radiant heating with a high degree of flexibility and functionality. These panels can be mounted horizontally or vertically on your wall, attached to your ceiling, or used with a low profile stand accessory. Additionally, these high-tech panels are "Dual Connection" meaning they can be used "as is" as plug-in models or modified by an electrician for a hardwired connection.

Shop Ember Flex
Specifications
  • Dual connection, each unit can be plug-in or hardwired
  • Wall-mounted, ceiling mounted, or stand accessory compatible
  • White finish with integrated frame
  • Available in 3 sizes: 35" x 12", 35" x 24", and 47" x 24"

Accessories
Stand Attachments Starting from $49.00

Stand up your Ember Flex radiant heating panel in areas where it’s not practical to attach a heating panel to the wall or ceiling.


Ember Towel Bar* Starting from $69.00

Turn your Ember radiant panel into a towel warmer with a flat towel bar (available in brushed metal, black, and white finishes).*


*Excludes IP-EM-FLX-WHT-0300-CW


Consult with a Radiant Panel Expert

Do you need to discuss your project with our experts? fill in the form below and we will respond within 1 business day.

:

The Technology Behind Radiant Panel Heaters


We have developed the most advanced technology for infrared panel heaters. All of the radiant panel heaters have a unique internal heating element, which outperforms other commonly used electric conductors. Our newly developed electric conductor achieves the highest possible efficiency. Developed with German and Austrian technicians, our panels use state of the art nano silver and nano copper materials to reach the highest possible heating performance with the lowest possible energy consumption. As opposed to existing panel heat conductors, which simply use carbon in various standard mixtures (e.g. carbon fibre texture, crystal carbon, etc.), our panels use a new concept for its heat generator, because of its outstanding safety, durability, and the high efficiency it yields.

The high efficiency combined with our connection system and patented reflector technology (100% of produced infrared rays are radiated to the front) make it possible that only a very small percentage of convectional heat (about 7%) is produced, which means that all the advantages of infrared heating can be achieved and energy efficient heating is guaranteed. The solid construction provides our radiant panel heaters with additional stability and prevents any deformation.

  • Copper and Nano Silver Bar

    Conductive polymer treatment on the copper connection as well as a special design of the nano silver bar, prevent hot spots and sparks as well as guaranteeing safety even in abnormal conditions or at very high surface temperatures.

  • Epoxy Ceramic Resin

    Adapting high quality epoxy resin as the cover and bottom layer, our radiant panel heaters have a very good level of durability and no burning danger. Because the edges are perfectly sealed, there is no water leakage or electricity leakage risk. Being very thin, our panels can be installed in nearly any location.

  • Carbon Copper Polyimide Panel

    Our electric conductor, which is made of carbon copper polyimide, leads to outstanding safety and durability as well as the high efficiency. It makes our radiant panel heaters the leading infrared panels. When compared to carbon fiber, graphite fiber has some clear advantages. Graphite has higher heat resisting characteristics, a lower thermal expansion co-efficient, excellent thermal conductivity, and is widely used as the material generating heat by electricity. Our special mixing process, that generates different power consumptions according to the applications, results in the best suitable efficiency rates using carbon and graphite at optimum rates.

Electric Wall Heaters Videos


Radiant Panel Heater Catalogs & Articles


Questions & Answers about our Electric Wall Heaters


Can an Ember radiant panel be mounted on the ceiling?

Only the Ember Flex radiant panels can be mounted from the ceiling and they come with all of the necessary hardware to accomplish this.

None of the radiant panel heaters from the Ember Glass or Ember Mirror lines can be mounted from the ceiling.

13 people found this helpful.  Did you find this helpful? Yes No

How hot is the infrared heating system when in use?

The heater is very hot during use (depending on model, up to 125° C or 257° F).

12 people found this helpful.  Did you find this helpful? Yes No

How far from the radiant panel will the heat substantially radiate and where should it be aimed?

Radiant heat travels through air, and typically heats up objects closer to the panel first and then the rest of the room later. Infrared heating from the panel can be easily detected from about 3-4 feet. Ideally, the radiant panel should be aimed onto the area with more use, since that will be the surface that will warm up first.

12 people found this helpful.  Did you find this helpful? Yes No

How quickly does the radiant panel heat up?

The startup heating time for this infrared heating system is approximately 5 to 10 minutes. However, your room will not feel warmer immediately because the cold objects in the room (furniture, walls, ceilings, floors, etc.) need to warm up first. Once these surfaces are heated via infrared heating, the warmth will spread throughout the room.

7 people found this helpful.  Did you find this helpful? Yes No

What should I do if my Ember radiant panel won’t heat up?

Verify 120V power at the connection of the panel to the circuit at the junction box in the wall (for hardwired connections), or at the outlet (for plug-in connections). Each Ember heater has a built-in safety switch that turns off the heating element automatically if it overheats. By unplugging or disconnecting the unit and waiting for about 10 to 15 minutes, the safety switch will reset automatically and the unit will be operational again.

If you experience additional issues, please give us a call at 1-800-875-5285.

6 people found this helpful.  Did you find this helpful? Yes No

What is an Ember radiant panel heater made from?

The heat conductor is carbon fiber pressed in an epoxy ceramic resin.

5 people found this helpful.  Did you find this helpful? Yes No

Do radiant heating products have polarity?

Electric-resistance heating cables and systems have no polarity. This includes all current WarmlyYours heating elements.

5 people found this helpful.  Did you find this helpful? Yes No

Is there a concern with children touching the panels if they get too hot?

Radiant panels using infrared heating can get very hot on the surface (up to 275ºF). For safety, it is recommended that your infrared heating system be mounted out of the reach of children.

3 people found this helpful.  Did you find this helpful? Yes No

How far from the radiant panel will the heat substantially radiate and where should it be aimed?

Radiant heat travels through air, and typically heats up objects closer to the panel first and then the rest of the room later. Infrared heating from the panel can be easily detected from about 3-4 feet. Ideally, the radiant panel should be aimed onto the area with more use, since that will be the surface that will warm up first.

2 people found this helpful.  Did you find this helpful? Yes No

Where is the on/off button for an Ember panel?

There is no on/off button. If you're using your dual connection Ember panel in the plug-in configuration, it can be unplugged when not in use or paired with compatible plug-in control devices like a timer. If you've elected to convert your dual connection panel to a hardwired connection, the panel should wired to a hardwired control option like a switch, a hardwired timer, or a hardwired thermostat.

2 people found this helpful.  Did you find this helpful? Yes No

How does one know which size panel is correct for a room?

If you have a room with "average" insulation levels, take the square footage and multiply it by 7 or 8 watts per square foot. That will provide a good estimate of the watts needed to heat that space.

2 people found this helpful.  Did you find this helpful? Yes No

1 person found this helpful.  Did you find this helpful? Yes No

1 person found this helpful.  Did you find this helpful? Yes No

1 person found this helpful.  Did you find this helpful? Yes No

Is there a concern with children touching the panels if they get too hot?

Radiant panels using infrared heating can get very hot on the surface (up to 275ºF). For safety, it is recommended that your infrared heating system be mounted out of the reach of children.

1 person found this helpful.  Did you find this helpful? Yes No

On what side of the panel is the hardwire connection/lead located?

The power box, where the cord starts, is located at the lower-middle part of the panel (for vertical mount) or left-middle (for horizontal mount). See additional images in the product's image gallery.

1 person found this helpful.  Did you find this helpful? Yes No

How quickly does the radiant panel heat up?

The startup heating time for this infrared heating system is approximately 5 to 10 minutes. However, your room will not feel warmer immediately because the cold objects in the room (furniture, walls, ceilings, floors, etc.) need to warm up first. Once these surfaces are heated via infrared heating, the warmth will spread throughout the room.

Did you find this helpful? Yes No

What is an Ember radiant panel heater made from?

The heat conductor is carbon fiber pressed in an epoxy ceramic resin.

Did you find this helpful? Yes No

What should I do if my Ember radiant panel won’t heat up?

Verify 120V power at the connection of the panel to the circuit at the junction box in the wall (for hardwired connections), or at the outlet (for plug-in connections). Each Ember heater has a built-in safety switch that turns off the heating element automatically if it overheats. By unplugging or disconnecting the unit and waiting for about 10 to 15 minutes, the safety switch will reset automatically and the unit will be operational again.

If you experience additional issues, please give us a call at 1-800-875-5285.

Did you find this helpful? Yes No

Can Ember Units be controlled with a dimmer?

We do not recommend controlling these panels with dimmers.

Did you find this helpful? Yes No

Are Ember radiant panels product far infrared heating rays?

Yes, Ember infrared heating panels produce the best and most efficient far infrared rays. Ember panels convert electrical energy into heat with nearly 100% efficiency. A special coating on the surface is optimized so as to achieve maximum heat dissipation in the wavelength range from 7 to 10 microns.

Did you find this helpful? Yes No

Where is the on/off button for an Ember panel?

There is no on/off button. If you're using your dual connection Ember panel in the plug-in configuration, it can be unplugged when not in use or paired with compatible plug-in control devices like a timer. If you've elected to convert your dual connection panel to a hardwired connection, the panel should wired to a hardwired control option like a switch, a hardwired timer, or a hardwired thermostat.

Did you find this helpful? Yes No

Radiant Panel Customer Reviews

Rated 4.8/5 based on 26 reviews

We take pride in providing both exceptional service and great electric radiant heating products. But don't just take our word for it, check out what some of our customers have had to say.

Customer Service (Account Manager, Jennifer Melus) was great.

Ember Glass Radiant Panels


Customer Service (Account Manager, Jennifer Melus) was great. I had a problem with a defective panel that was burning off the white paint, emitting VOC. Jennifer was very helpful in replacing the defective panel. Although there were a few glitches during the process, their over all customer service was excellent! This is a huge reflection on the company, as they not only stand by their product but their Customer Service was very good!

Jay S. in Seattle, WA

Review

Ember Glass Radiant Panels


Customer Service (Account Manager, Jennifer Melus) was great. I had a problem with a defective panel that was burning off the white paint, emitting VOC. Jennifer was very helpful in replacing the defective panel. Although there were a few glitches during the process, their over all customer service was excellent! This is a huge reflection on the company, as they not only stand by their product but their Customer Service was very good!

Jay S. in Seattle, WA

Attractive and effective

Ember Glass Radiant Panels


Attractive and effective. Install went smoothly.

Moob'm I. in MANHATTAN, NY

great accessory

/en-US/products/line/radiant-panel-ember-accessories-towel-warmer-bar


The panel can fit two bars. We chose just one and love it! We put the bar on the lower slot so that the towels do not block the panel. The panel does a great job warming the bathroom and the towels are warm!

Amy K. in Chicago, IL

More Customer Reviews